Página de la tienda
Space Engineers
Todo Discusiones Capturas Artwork Retransmisiones Vídeos Workshop Noticias Guías Reseñas

Space Engineers

Página de la tienda
Space Engineers >  Workshop > Workshop de Eikester > AdvancedDoor - Example Mod > Discusiones
AdvancedDoor - Example Mod
Descripción Discusiones4 Comentarios87 Notas sobre cambios
 Este tema se ha marcado como fijo, por lo que probablemente sea importante
Eikester  [desarrollador] 4 JUN 2015 a las 8:11
Parameters
I will try to explain the new definition Parameters as good as possible:

Subparts are added in Definition (no dummies needed) like this:
<Subparts> <SubpartDefinition> <Name>HingedDoorLeft</Name> </SubpartDefinition> <SubpartDefinition> <Name>HingedDoorRight</Name> </SubpartDefinition> </Subparts>
SubpartDefinition has 3 Parameters:
Name: name of the Subpart Model without extension, will be translated to "path/to/subpart.mwm"
PivotPosition [optional]: Vector3, can be used to overwrite the Models Pivot
TO BE ADDEDHasPhysics [optional]: default = true, can be used to disable Collision for this Subpart

<OpeningSequence> <Opening> <IDs>0</IDs> <Move>Slide</Move> <SlideDirection x="-1" y="0" z="0" /> <MaxOpen>0.6</MaxOpen> <Speed>1</Speed> <OpenDelay>0</OpenDelay> <CloseDelay>1</CloseDelay> <OpenSound>BlockDoorSmallOpen</OpenSound> <CloseSound>BlockDoorSmallClose</CloseSound> </Opening> <Opening> <IDs>1</IDs> <Move>Slide</Move> <SlideDirection x="1" y="0" z="0" /> <MaxOpen>0.6</MaxOpen> <Speed>1</Speed> <OpenDelay>1</OpenDelay> <CloseDelay>0</CloseDelay> </Opening> </OpeningSequence>
OpeningSequence holds a list with Openings.
Openings have a couple of Parameters to define how a Subpart should move/rotate:

IDs: string with IDs of the Subparts the Opening should be applied to i.e. <IDs>0</IDs>, <IDs>0,1,2,3,4</IDs> or <IDs>0-4</IDs>
Move[optional]: can be either Rotate or Slide, default = Slide
Speed[optional]: how fast the Subpart moves, default = 1
SlideDirection: Vector3, <SlideDirection x="-1" y="0" z="0" /> would make the Subpart slides to the left
RotationAxis: X, Y or Z, default X
OpenDelay: default = 0, value in seconds
CloseDelay: default = 0, value in seconds
MaxOpen: either degrees or meters
PivotPosition[optional]: Vector3, can be used to override the Models Pivot, used in the SafeDoor example
OpenSound/CloseSound[optional]: default = none, this is per Subpart which means every subpart can play a different Sound when it starts Opening/Closing

The OpeningSequence is played backwards when a Door closes
Última edición por Eikester; 25 JUN 2015 a las 13:02
< >
Mostrando 1-15 de 16 comentarios
KZDarkheart 5 JUN 2015 a las 5:58 
Hay Eikester, I hope you know something: Your Awesome.
#1
Tristavius 26 JUL 2015 a las 5:59 
This opens up a *lot* of possibilities. Wish I'd seen it sooner - seems to be a lot of stuff sneaking into the game with nobody aware at the moment!
#2
moderncolin 25 MAR 2016 a las 3:00 
Thank You (^_^)
#3
moderncolin 25 MAR 2016 a las 5:42 
Hey i cannot open up your FBX files in blender ..error canot open ACSII fbx .Could you upload Binary FBX to plz. ?
#4
moderncolin 25 MAR 2016 a las 7:12 
Hi Eikester i made a mod and cannot get the doors to open .I have detector_advanceddoor as terminal and get error in SE log do you no what could be causing this. ?
[img]http://i.imgur.com/yYCNaNz.png[/img]
Última edición por moderncolin; 25 MAR 2016 a las 7:14
#5
Eikester  [desarrollador] 25 MAR 2016 a las 7:54 
make sure you have proper collision files because a bad collision mesh can cause subparts to not move, another thing you can try is to add <UseModelIntersection>true</UseModelIntersection> in your sbc, also make sure the dummy name ends with _NUMBER i.e. detector_advanceddoor_1 even if you only have one
#6
moderncolin 25 MAR 2016 a las 8:15 
Hi .Thanks for reply .Yep got UseModelIntersection in and just tryed detector_advanceddoor with numbers at the end still nilch .and am useing blender with harags addon Rigid body for collisions . Here's the .sbc file
http://textuploader.com/5nxlu
#7
Eikester  [desarrollador] 25 MAR 2016 a las 8:33 
do you have dummies like subpart_door1 in your model? if so you have to use the dummies name without the subpart_ prefix in your sbcs SubpartDefinition <Name> field i.e.
<SubpartDefinition>
<Name>door1</Name>
</SubpartDefinition>

<Name> can be either the Models name without the .mwm suffix, in this case you should not use subpart_ dummies OR the name of the subpart_ dummy without the prefix, in this case it acts like a reference to the dummy in the model
#8
moderncolin 25 MAR 2016 a las 9:14 
Um i took out all subpart_empties/dummys from model when useing this .sbc to get subparts to load ingame .. i just re added empties/dummys to model with name of teh subpart without the subpart_ and linked to the model and still nothink i dont no wats happing
#9
moderncolin 25 MAR 2016 a las 10:08 
O its for a door like this. [img]http://i.imgur.com/oEScHd4.png[/img]
#10
moderncolin 26 MAR 2016 a las 18:49 
Hey ok i got them working somthink must of been up with my .sbc dont no what it give no errors . I started agian useing your .sbc as base its now working .Thanks You Eikester . Here's my .sbc now http://txt.do/5ngz2 .. and a gif of door [img]http://i.imgur.com/vhY4LOV.gif[/img]
Última edición por moderncolin; 26 MAR 2016 a las 18:49
#11
moderncolin 21 ABR 2016 a las 15:38 
Hi Eikester is there a way of giving a advanced door subpart mountpoint ?
http://i.imgur.com/iJmWsoY.jpg
Última edición por moderncolin; 21 ABR 2016 a las 15:40
#12
moderncolin 2 JUN 2016 a las 4:53 
Hey Eikester i have made doors with the advanced door method but they are not air tight for some reason .. Do you no what may be causing this ? I can add <IsAirTight>true</IsAirTight> but then its allways airtight wether there open or closed
#13
Eikester  [desarrollador] 4 JUN 2016 a las 12:01 
normaly the Airtightness is controlled by the Mountpoints, that would be the first one to check if they are correct
#14
moderncolin 4 JUN 2016 a las 12:14 
Hey yep it sure was i had them covering ther front and back of the door's... But i tried to make a door like the airtight slide door that can be mounted on all 6 side's ..But when i would put the mount point's off the slide door on my door it would just be air tight even when door where open any clue's ? the only thing different is the definitions but would that make a difference's
#15
< >
Mostrando 1-15 de 16 comentarios
Por página: 1530 50