商店页面
Space Engineers
全部 讨论 截图 艺术作品 实况直播 视频 创意工坊 新闻 指南 评测

Space Engineers

商店页面
Space Engineers >  创意工坊 > Gwindalmir 的创意工坊 > [STABLE/DEV] Advanced FTL Jump Drive/Interdictor > 讨论
[STABLE/DEV] Advanced FTL Jump Drive/Interdictor
描述 讨论9 留言838 改动说明
Cleaner409 2015 年 1 月 6 日 上午 12:23
Multiplayer compatability
Every jump a person makes in multiplayer lags the whole server, so having to make 50 jumps to get 1000k instead of 1 jump makes the server lag alot. When you have 5-20 people using FTL 50 times to make it 1000k it gets REALLY bad. Might want to change the power usage to uranium usage or alot less power. As it is our server gets bad when just 1 of us is using FTL. Maybe a version of the mod for multiplayer (Non Realistic) so its usable on multiplayer servers would work better. Kill the cooldown and change the power consumption to alot less or uranium for that mod. That would allow both communities to enjoy the mod.
最后由 Cleaner409 编辑于; 2015 年 1 月 6 日 上午 12:24
< >
正在显示第 1 - 15 条，共 39 条留言
Sarekh 2015 年 1 月 6 日 上午 11:20 
I have experienced a momentary slowdown of server speed on our server as well - it comes down from a stable 0.8 or 0.9 to 0.25 or even less for a minute or so until it slowly crawls up again. As we are only using one or two FTL ships this has not bothered us so far and we asserted the sim speed drop to jumping to unused procedural grids that had do load while the old grid was still active - are you saying that this is caused by something else in the energy consumption system?
#1
Cleaner409 2015 年 1 月 6 日 下午 5:37 
No Im saying the amount of jumps needed to make it 1000k used to be 1 and now with the power system change it takes 50+ which causes alot more lag than 1 jump. Changing the power system to a uranium system or changing it so bigger exploration vessels can jump farther in 1 jump would reduce the repeated need to jump.
#2
Gwindalmir  [开发者] 2015 年 1 月 8 日 上午 11:31 
There could be a couple of issues here:
1) Script performance. When someone triggers the FTL, the script executes on ALL clients, even if they don't have an FTL. This is what allows mutiple people to jump at the same time. However if the script is performing slowly, it will lag everyone out.
2) Long jumps causing more data to syncronize. Not sure if this actually happens, more speculation than actual evidence.
If possible, I'd rather optimize the code so it lags less in general.
Does the lag happen the entire time the drive is powered up, or only at the instant of jumping?
#3
Cleaner409 2015 年 1 月 8 日 下午 4:18 
At the instant of jumping. And I have made a discovery. When using multiple FTL drives( [Slave] Does not work on multiple slaves by the way) the FTL's each make the jump so on LONG jumps like 600k I use 7 FTL's and that makes 7 jumps which lags the server out 7 times. I have looked at what is going on extensivly and they do not simply support the 1 FTL they all trigger a jump.
#4
Gwindalmir  [开发者] 2015 年 1 月 8 日 下午 7:51 
引用自 Cleaner409：
At the instant of jumping. And I have made a discovery. When using multiple FTL drives( [Slave] Does not work on multiple slaves by the way) the FTL's each make the jump so on LONG jumps like 600k I use 7 FTL's and that makes 7 jumps which lags the server out 7 times. I have looked at what is going on extensivly and they do not simply support the 1 FTL they all trigger a jump.
I don't see how that's possible. If the [Slave] keyword is parsed properly, that particular drive literally does nothing. You can look at the code. It ignores all commands and disables attempts at manual control.
I am certainly confused.
#5
Cleaner409 2015 年 1 月 9 日 上午 3:58 
Using more than 1 slave drive doesnt work so I have had to use multiple active drives to make big jumps. They make 4 jumps to the same spot if I use 4. Only 1 slave works from what I have experienced.
#6
Jan5366x 2015 年 1 月 9 日 下午 5:22 
on oure server it works smooth until now ...
#7
Gwindalmir  [开发者] 2015 年 1 月 9 日 下午 9:23 
引用自 Jan5366x：
on oure server it works smooth until now ...
Can you elaborate?
#8
joemorin73 2015 年 1 月 12 日 上午 10:15 
@Pheonix, I'm the server owner of the system Cleaner409 plays on. I think one of the details not mentioned is the size of the ship jumping. We are jumping large ships that are roughly 4000 blocks or more. I think the delay is the clients need to update a lot of data.
#9
Cleaner409 2015 年 1 月 13 日 上午 11:17 
Oh definatly some of the lag is from the size but the reason for multiple jumps right now is power ratio not being able to handle bigger jumps for bigger ships causing us to use more than 1 FTL which means multiple jumps when activating multiple FTL's to make 1 jump.
#10
Cleaner409 2015 年 1 月 13 日 上午 11:19 
The script is triggering multiple jumps when you use more than 1 FTL at the same time to make 1 jump. That was the nearly 60 second server stop that we saw a few times when I jumped joe. Which is why you guys saw me jumping alot of smaller jumps all the time causing only 10 to 20 second lag each time.
#11
Gwindalmir  [开发者] 2015 年 1 月 13 日 下午 6:37 
引用自 Cleaner409：
Oh definatly some of the lag is from the size but the reason for multiple jumps right now is power ratio not being able to handle bigger jumps for bigger ships causing us to use more than 1 FTL which means multiple jumps when activating multiple FTL's to make 1 jump.
That's what doesn't make sense. If you have multiple FTL drives with the extras all in [Slave] mode, it still only does ONE jump. The slaves literally do nothing except make sure they remain on and off, appropriately, depending on the master state.
Can you upload the world, or even better a video, demonstrating this issue?
#12
Cleaner409 2015 年 1 月 14 日 上午 6:23 
The multiple drives in slave do not work so I used 4 activly. That made 4 jumps instead of 1. When I had 6 drives in slave mode only 1 kicked on sometimes 2 with the master but it was never enough to do a 50k jump even. 15,000,000kg was the ship weight.
#13
Gwindalmir  [开发者] 2015 年 1 月 14 日 下午 5:53 
引用自 Cleaner409：
The multiple drives in slave do not work so I used 4 activly. That made 4 jumps instead of 1. When I had 6 drives in slave mode only 1 kicked on sometimes 2 with the master but it was never enough to do a 50k jump even. 15,000,000kg was the ship weight.
Ah. It's only supposed to turn on enough extra drives to satisfy the power requirements, not more than that. However if it's still not turning on enough, there might be a bug. Are they on separate grids (eg. separated by connector), because that won't work?
最后由 Gwindalmir 编辑于; 2015 年 1 月 14 日 下午 5:53
#14
Cleaner409 2015 年 1 月 17 日 上午 6:33 
No they were all sitting right next to each other. I have tried all on one ship, connected 2 with a connector, and connecting 4 with merge blocks. None of these used more than 2 slaves. My original setup had 7 of them built almost on top of each other cause I thought maybe the distance on the same ship might be an issue but built right on top of each other still only produced 2 slaves firing up. Is it possible that a little server lag might have made them not fire enough up fast enough because of sent/received signals between each?
#15
< >
正在显示第 1 - 15 条，共 39 条留言
每页显示数： 1530 50