商店页面
DayZ
全部 讨论 截图 艺术作品 实况直播 视频 创意工坊 新闻 指南 评测
DayZ >  创意工坊 > cynep 的创意工坊 > Early Winter or late Fall in Chernarus > 讨论
Early Winter or late Fall in Chernarus
描述 讨论2 留言297 改动说明
 此主题已被置顶，因此可能具有重要性
cynep  [开发者] 2024 年 11 月 12 日 下午 12:48
About the mod, Installation, F.A.Q.
На русском писать не буду, здесь все и так понятно


What does the mod do?
The mod simply changes textures, plant models and adds snow as weather

How to install this mod?
Installed like other mods. Just copy the bikey, write the mod in "-mod=" (preferably at the beginning) and that's all

Where are the mpmissions?
I don't make mpmissions for your servers, because in essence this mod is just a global map retexture, not different map. But you can read the instructions and find some tips about configure below

Also I don’t recommend to set the winter months (1, 2, 12) or late autumn months (10, 11) in init.c file in your mpmission world. Imo I recommend to leave default month (9 - September) or set 8 - August for better visual combination of colors on the server because at such a time the sun is higher, the day is longer and the colors don’t go too much into the orange shade

Where and how to change the enviroment temperature?
All temperatures for each month are changed in cfggameplay.json in the folder of your world mpmission in line 53-54 - "environmentMinTemps" and max. (12 values ​​- 12 months). You can take the temp f.e. from Sakhal from the Bohemia github[github.com], where are all the mpmmissions. After that set this enableCfgGameplayFile = 1; somewhere at the end of the serverDZ.cfg file

How to make food cold or frozen?
You also just need to change the enviroment temps (read above). At least for me it affects the freezing of food in my world

The temperature does not change, what should I do?
My mod doesn't affect the your server temps. It all depends on you and the mods installed. F.e, as I noticed, the DayzUnderground mod affected the temps and it stopped working at all. And do the last point in the previous question

How to fix grass from the sakhal or trees swaying too much in the wind?
This can be fixed by reducing the value max="20.0" in the <windMagnitude> section in cfgweather.xml. I set max="4.0"

Can you add more winter/snow covered trees?
Use this addon for this mod

Can you remove thunder lightning during a storm?
You can do this yourself. Find this section at the end in cfgweather.xml in your mission folder
<!-- Lightning density (0..1), threshold for the lightning appearance (tied to the overcast value, 0..1), time (seconds) between the lightning strikes --> <storm density="1.0" threshold="0.9" timeout="45"/>
and increase the timeout="45" to higher values, which would mean that lightning would strike every n... seconds. F.e set timeout="3000"

Animals, cars do not appear, something broke, etc
As I wrote, my mod doesn't affect anything except textures and snow as weather. This's your problem

Can you add more snow in the mountains?
Firstly, I think that in Chernarus there are no high mountains on which more snow could be added like Namalsk or Sakhal mountains. In addition, the climate of the region (I focus on real life and the location of Cherno) isn't suitable for adding more snow to the mountains. Secondly, it's impossible to do this normally within the game

How to remove snow weather on server after deleting the mod?
I will offer several methods (all of them are working, tested):
1. Go to cfgweather.xml in your mpmission folder and set the values ​​<weather reset=".." to 1. Start the server, stop, return the value to 0, start. Return it to 0 if you want to save the weather after restarts
2. Go to storage_1\data in your mpmission folder. Make a backup of the vehicles files, delete all events. Start the server, log in in world, stop, return vehicles (cuz after deleting these events files, server will consider that the number of vehicles in the world is 0 and will double them, but backup will return the number as it was), start the server

Can you remake other maps?
I don't plan to do it now. There are many different reasons: time, my skills, unpopularity of maps, I won't do it even for money. But there is a way how you can achieve an early winter. Use both my mods for Cherno and Livonia. If the map uses vanilla textures, my mods will replace them with mine. I haven't checked on other maps and on which ones it will work. Some error may occur. Try to swap mod names in "-mod=". I can't check for an error now, because simply don't get error during tests. But in the future I will try to fix it somehow

How to make it rain temporarily and then snow or only rain?
Method by Paulo 76561198046108699 to make it rain first and then snow. Snow starts at 70% overcast but you can change this and other parameters, you just need to read about all values this file
1. Go to cfgweather.xml in your mpmission folder and paste this in that xml
2. If you don't wipe the server, do this: set the "reset" parameter to 1, start the server to reset the weather, then return it to 0 to save the server weather after restarts


To get only rain you can read how this file is working and try to use vanilla xml or change these settings and disable the <snowfall> section


<?xml version="1.0" encoding="UTF-8" standalone="yes" ?> <!-- 'reset' and 'enable' are a bool, and therefore supports: 0/1, true/false, yes/no --> <!-- 'reset' controls whether you want to load in the weather from storage or not (false by default) --> <!-- 'enable' controls whether this file is enabled or not (true by default) --> <weather reset="0" enable="1"> <overcast> <!-- Initial conditions of the overcast (target value, time to change, how long will it stay) --> <current actual="0.1" time="120" duration="299" /> <!-- What is the range of the overcast value (0..1) --> <limits min="0.0" max="1.0" /> <!-- How long does it take to the overcast to change from one value to other (time in seconds) --> <timelimits min="300" max="1800" /> <!-- How much should the overcast change (0..1) --> <changelimits min="0.0" max="1.0" /> </overcast> <fog> <!-- Initial conditions of the fog (target value, time to change, how long will it stay) --> <current actual="0.1" time="120" duration="299" /> <!-- What is the range of the fog value (0..1) --> <limits min="0.0" max="1.0" /> <!-- How long does it take to the fog to change from one value to other (time in seconds) --> <timelimits min="300" max="1800" /> <!-- How much should the fog change (0..1) --> <changelimits min="0.0" max="1.0" /> </fog> <rain> <!-- Initial conditions of the rain (target value, time to change, how long will it stay), restricted by thresholds (see below) --> <current actual="0.1" time="120" duration="299" /> <!-- What is the range of the rain value (0..1) --> <limits min="0.0" max="1.0" /> <!-- How long does it take to the rain to change from one value to other (time in seconds) --> <timelimits min="300" max="1800" /> <!-- How much should the rain change (0..1) --> <changelimits min="0.0" max="1.0" /> <!-- What range of the overcast value allows the rain to be preset (min, max overcast value, time in seconds it takes for rain to stop if the overcast is outside of the specified range) --> <thresholds min="0.39" max="0.69" end="60" /> </rain> <windMagnitude> <!-- Initial conditions of the wind magnitude (target value, time to change, how long will it stay), restricted by thresholds (see below) --> <current actual="0.1" time="60" duration="120" /> <!-- What is the range of the wind magnitude value in m/s --> <limits min="0.0" max="5.0" /> <!-- How long does it take to the wind magnitude to change from one value to other (time in seconds) --> <timelimits min="180" max="1800" /> <!-- How much should the wind change --> <changelimits min="0.0" max="99.0" /> </windMagnitude> <windDirection> <!-- Initial conditions of the wind direction(target value, time to change, how long will it stay), restricted by thresholds (see below) --> <current actual="0.1" time="60" duration="120" /> <!-- What is the range of the wind direction (angle in radians) --> <limits min="-3.14" max="3.14" /> <!-- How long does it take to the wind direction to change from one value to other (time in seconds) --> <timelimits min="180" max="1800" /> <!-- How much should the wind change direction --> <changelimits min="-1.0" max="1.0" /> </windDirection> <snowfall> <!-- Initial conditions of the snowfall (target value, time to change, how long will it stay), restricted by thresholds (see below) --> <current actual="0.1" time="120" duration="299" /> <!-- What is the range of the snowfall value (0..1) --> <limits min="0.0" max="1.0" /> <!-- How long does it take to the snowfall to change from one value to other (time in seconds) -- <timelimits min="300" max="1800" /> <!-- How much should the snowfall change (0..1) --> <changelimits min="0.0" max="1.0" /> <!-- What range of the overcast value allows the snowfall to be preset (min, max overcast value, time in seconds it takes for snowfall to stop if the overcast is outside of the specified range) --> <thresholds min="0.7" max="0.99" end="60" /> </snowfall> <!-- Lightning density (0..1), threshold for the lightning appearance (tied to the overcast value, 0..1), time (seconds) between the lightning strikes --> <storm density="1.0" threshold="1.0" timeout="120"/> </weather>
最后由 cynep 编辑于; 9 月 21 日 下午 2:56
< >
正在显示第 1 - 14 条，共 14 条留言
Paulo 2024 年 11 月 23 日 上午 3:36 
serverDZ.cfg, write the line enableCfgGameplayFile = 1; somewhere at the end

In // Description of the server. Gets displayed to users in client server browser or class Missions?
#1
cynep  [开发者] 2024 年 11 月 23 日 上午 4:22 
@Paulo no, copy enableCfgGameplayFile = 1; and paste after the storageAutoFix = 1; line
#2
Paulo 2024 年 11 月 23 日 下午 10:12 
Thanks man... You creat great mod, congratulations!
#3
Deceased 2024 年 11 月 26 日 下午 12:46 
引用自 cynep：
На русском писать не буду, здесь все и так понятно


What does the mod do?
The mod simply changes textures, plant models and adds snow as weather

How to install this mod?
Installed like other mods. Just copy the bikey, write the mod in "-mod=" (preferably at the beginning) and that's all

Where are the mpmissions?
I don't make mpmissions for your servers, since I have nothing to configure and you can do it all yourself by reading the instructions below

Where and how to change the enviroment temperature?
All temperatures for each month are changed in cfggameplay.json in the folder of your world mpmission in line 53-54 - "environmentMinTemps" and max. (12 values ​​- 12 months). You can take the temp f.e. from Sakhal from the Bohemia github, where are all the mpmmissions. I just set min -7 and max -2 everywhere. After that, in serverDZ.cfg, write the line enableCfgGameplayFile = 1; somewhere at the end

How to make food cold or frozen?
You also just need to change the enviroment temps (read above). At least for me it affects the freezing of food in my world

The temperature does not change, what should I do?
My mod does not change the temps of your servers. It all depends on you and the mods installed. F.e, as I noticed, the DayzUnderground mod affected the fact that the temps stopped working at all. And do the last point in the previous question

How to fix grass from the sakhal or trees swaying too much in the wind?
This can be fixed by reducing the value max="20.0" in the <windMagnitude> section in cfgweather.xml. I set max="4.0"

Animals, cars do not appear, something broke, etc.
As I wrote, my mod does not affect anything except textures and snow as weather. This is your problem

It suddenly started raining. How can I leave snow and rain at the same time?
Honestly, I didn't understand how it's working now. But in cfgweather.xml all this can be somehow adjusted, f.e. by changing the duration of rain

Can you add more snow in the mountains?
Firstly, I think that in Chernarus there are no separate high mountains on which more snow could be added, unlike the mountains of Namalsk or Sakhal. In addition, the climate of the region (I focus on real life and the location of Cherno) is not suitable for adding more snow to the mountains. Secondly, it is impossible to do this normally within the game

How to remove snow weather on server after deleting the mod?
I will offer several methods (all of them are working, tested):
1. Go to cfgweather.xml in your mpmission folder and set the values ​​<weather reset="" and enable=""> to 1 or vice versa 0. Start the server, stop, return the values, start
2. Go to storage_1\data in the mpmission folder. Make a backup of the vehicles files, delete all events. Start the server, log in, stop, return vehicles (cuz after deleting events, server will consider that the number of vehicles in the world is 0 and will double them, but backup will return the number as it was), start the server

Can you remake other maps?
I don't plan to do it now. There are many different reasons: time, my skills, unpopularity of maps, I won't do it even for money. But there is a way how you can achieve an early winter. Use both my mods for Cherno and Livonia. If the map uses vanilla textures, my mods will replace them with mine. I haven't checked on other maps and on which ones it will work. Some error may occur. Try to swap mod names in "-mod=". I can't check for an error now, because simply don't get error during tests. But in the future I will try to fix it somehow

How do I contact you, do you have a discord? I’m a fellow modder and have a question 🙋
#4
cynep  [开发者] 2024 年 11 月 26 日 下午 8:46 
@Deceased
You can contact with me in steam first, after maybe we can chat in discord
最后由 cynep 编辑于; 2024 年 11 月 26 日 下午 8:47
#5
TYGGMOR 1 月 10 日 上午 5:15 
Спасибо папаша!
#6
Warlock 2 月 3 日 上午 4:14 
After i used the Method by Paulo 76561198046108699

it doesnt snow or rain anymore weird...
#7
Deceased 2 月 3 日 下午 12:40 
引用自 Warlock：
After i used the Method by Paulo 76561198046108699

it doesnt snow or rain anymore weird...

For the snow youd have to enable it in cfgweather in your mission folder, since 1.26 dropped.
#8
HAz3 3 月 14 日 上午 7:18 
error during installation, file missing PBO "rocks.pbo" lol wtf ? i have "rocks.pbo" in addon folder... :steamsad:
#9
cynep  [开发者] 3 月 14 日 上午 7:51 
@Haze your server manager, like omega manager was updated incorrectly the mod or you incorrectly transferred the pbo files so that server couldn’t check them. Idk exactly how servers and mods with pbos works, but that’s the problem if you’re the server host. You need to check this pbo in the mod folder @Early Winter ... in Chernarus\addons, not in the dayzserver\addons or steam\common\dayz\addons folder
最后由 cynep 编辑于; 3 月 14 日 上午 7:56
#10
HAz3 3 月 14 日 上午 8:57 
Files in game (mod steam) and files in host are same. an error occurs (addons\rocks.pbo)
I have this files in addon folders :steamfacepalm:
#11
cynep  [开发者] 3 月 14 日 上午 9:04 
@Haze this issue isnt related to my mod. It occurs due to an error updating my mod on your server. There’ve already been dozens of similar comments. It always turned out that the problem was on their servers
#12
Pavča 10 月 1 日 下午 3:23 
Hi, I need some advice. I have a problem removing the snow..I tried to do it exactly according to the instructions you gave but I can't..Is there any way to do it? :)
#13
cynep  [开发者] 10 月 2 日 上午 7:28 
@Pavča only the step 12 above in f.a.q will help you or wipe the server
最后由 cynep 编辑于; 10 月 2 日 上午 7:29
#14
< >
正在显示第 1 - 14 条，共 14 条留言
每页显示数： 1530 50