商店页面
Space Engineers
全部 讨论 截图 艺术作品 实况直播 视频 创意工坊 新闻 指南 评测

Space Engineers

商店页面
Space Engineers >  创意工坊 > Raidfire 的创意工坊 > OmniCorp - OmniTools[Lasers] Replaced by OmniArc(better models and more specialized) > 讨论
OmniCorp - OmniTools[Lasers] Replaced by OmniArc(better models and more specialized)
描述 讨论4 留言122 改动说明
Raidfire  [开发者] 2024 年 4 月 10 日 下午 11:16
OmniTools Adjustments
This is mostly here for minor adjustments like if the sound is too loud, ports not working, control terminals not working(OmniSpecter doesnt have one)

OmniBeam X-1100 Range, speed and workrate will stay the same. The Range is there to allow for larger builds when using the Viktors Autoprinting script. Speed is neither too high or too low its at one of the lowest settings(If its still too fast then i belive you have too many of them) workrate is on the lowside of being 2(aka 2 blocks) This is so it wont pause between welding blocks.

OmniBeam X-1100 Range Differential: Weld(180m) - Grind(80m)
最后由 Raidfire 编辑于; 2024 年 4 月 10 日 下午 11:16
< >
正在显示第 1 - 3 条，共 3 条留言
Raidfire  [开发者] 2024 年 4 月 10 日 下午 11:16 
Sound too high Yay or Nay? Either way im pushing an update in arround 30 min to adjust volume from 0.7(weld) and 0.5(grind) to 0.2 on both. Update is done 11.4
最后由 Raidfire 编辑于; 2024 年 4 月 11 日 上午 2:24
#1
Come and See 2024 年 4 月 12 日 上午 9:12 
I think the X-2200 should also be converted into a welder/grinder/drill because there's no other laser tools for the small grid. Also, the range on the X-2200 is very short and the drill speed isn't that fast. I'm comparing this against the https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=3175774286&searchtext=laser+mining as well.

Also, with only small port conveyor ports I don't think on a small grid grinded objects could pass through the conveyor system? Pretty sure you need large port entries.
最后由 Come and See 编辑于; 2024 年 4 月 12 日 上午 9:15
#2
Raidfire  [开发者] 2024 年 4 月 12 日 上午 10:14 
First of im not going to convert any of them to anything else then what they are. My mod and SLM are two completly diffrent mods. I specificly tailored my mod towards MP servers. So performance was the first thing on the agenda when making them, second was blocklimits wich servers normally do. The X-2200 will only remain a drill. So small ports are fine. Its intended. Im not doing what everyone else is doing. Because i did this for MP servers specificly. And it will be hard setting up blocklimits on blocks using all 3 modes. So everything will remain as it is.
最后由 Raidfire 编辑于; 2024 年 4 月 12 日 下午 1:46
#3
< >
正在显示第 1 - 3 条，共 3 条留言
每页显示数： 1530 50