商店页面
Garry's Mod
全部 讨论 截图 艺术作品 实况直播 视频 创意工坊 新闻 指南 评测

Garry's Mod

商店页面
Garry's Mod >  创意工坊 > Fishke 的创意工坊 > RP_NYCity > 讨论
RP_NYCity
描述 讨论76 留言1085 改动说明
jaffa 2023 年 1 月 30 日 上午 8:23
Crashing on "Initializing World"
Getting this error on the "Initializing World" screen which closes my game, I don't get it with any other maps or any other of Fishke's maps such as Southside.

I have a Ryzen 5 5600x, RTX 2070, 32gb ram, and I'm running the x64 branch.
This seems to happen regardless of enabled mods as I have tried disabling all mods to use it and gotten the same thing

Extracting BSP to map.pack in order to mount BSP embedded content...
PREP OK
Couldn't write map.pack to mount embedded content!
SOLID_VPHYSICS static prop with no vphysics model! (models/unioncity3/propper/ucmansionyardlights.mdl)
SOLID_VPHYSICS static prop with no vphysics model! (models/unioncity3/propper/ucbridge.mdl)
SOLID_VPHYSICS static prop with no vphysics model! (models/unioncity3/propper/3dskybox.mdl)
SOLID_VPHYSICS static prop with no vphysics model! (models/unioncity2/propper/corkboard1.mdl)
SOLID_VPHYSICS static prop with no vphysics model! (models/unioncity3/propper/cdapt1doors2.mdl)
SOLID_VPHYSICS static prop with no vphysics model! (models/unioncity2/props_alley/newslitter3.mdl)
SOLID_VPHYSICS static prop with no vphysics model! (models/props/interior/bathtub_showerhead.mdl)
SOLID_VPHYSICS static prop with no vphysics model! (models/unioncity3/propper/cdtriplexlights.mdl)
SOLID_VPHYSICS static prop with no vphysics model! (models/props/interior/bathtub_showerhead.mdl)
SOLID_VPHYSICS static prop with no vphysics model! (models/unioncity3/props_misc/electricbox3.mdl)
SOLID_VPHYSICS static prop with no vphysics model! (models/unioncity2/props_alley/newslitter3.mdl)
SOLID_VPHYSICS static prop with no vphysics model! (models/unioncity2/props_alley/newslitter3.mdl)
SOLID_VPHYSICS static prop with no vphysics model! (models/unioncity2/props_alley/newslitter3.mdl)
SOLID_VPHYSICS static prop with no vphysics model! (models/unioncity2/propper/corkboard4.mdl)
SOLID_VPHYSICS static prop with no vphysics model! (models/unioncity3/props_lighting/ceiling_light4_med.mdl)
SOLID_VPHYSICS static prop with no vphysics model! (models/unioncity3/propper/townhousewincurt1.mdl)
SOLID_VPHYSICS static prop with no vphysics model! (models/unioncity2/propper/corkboard2.mdl)
SOLID_VPHYSICS static prop with no vphysics model! (models/unioncity3/propper/cdpdinter.mdl)
SOLID_VPHYSICS static prop with no vphysics model! (models/unioncity3/propper/cdapt1doors4.mdl)
SOLID_VPHYSICS static prop with no vphysics model! (models/unioncity3/props_alley/junk3.mdl)
SOLID_VPHYSICS static prop with no vphysics model! (models/unioncity3/props_lighting/lightswitch.mdl)
SOLID_VPHYSICS static prop with no vphysics model! (models/unioncity3/props_lighting/lightswitch.mdl)
SOLID_VPHYSICS static prop with no vphysics model! (models/unioncity3/props_lighting/lightswitch.mdl)
Failed to create shape: Hull building failed, point 110 had an error of 7.31209e-06 (relative to tolerance: inf).
最后由 jaffa 编辑于; 2023 年 1 月 30 日 上午 8:42
< >
正在显示第 1 - 9 条，共 9 条留言
Fishke  [开发者] 2023 年 1 月 30 日 上午 9:14 
I can't be of much help unfortunately, but I can say those SOLID_VPHYSICS errors are just the models in the map looking for a collision model when they're missing one (because they don't need one). It's nothing that you need to fix or worry about.

"Failed to create shape: Hull building failed, point 110 had an error of 7.31209e-06 (relative to tolerance: inf)."
I've never had that appear in my console during all the testing, so my guess is as good as yours. Your system sounds way more than capable to run any Gmod map, but I can't say why or what makes you crash. When all else fails, rename your GarrysMod folder to something else, verify game files through Steam and try playing on a 100% fresh install as that's what I have used when I have done any testing. Try switching back to x86 from the 64 bit branch too, just in case.
最后由 Fishke 编辑于; 2023 年 1 月 30 日 上午 9:16
#1
jaffa 2023 年 1 月 30 日 上午 9:33 
引用自 Fishke：
I can't be of much help unfortunately, but I can say those SOLID_VPHYSICS errors are just the models in the map looking for a collision model when they're missing one (because they don't need one). It's nothing that you need to fix or worry about.

"Failed to create shape: Hull building failed, point 110 had an error of 7.31209e-06 (relative to tolerance: inf)."
I've never had that appear in my console during all the testing, so my guess is as good as yours. Your system sounds way more than capable to run any Gmod map, but I can't say why or what makes you crash. When all else fails, rename your GarrysMod folder to something else, verify game files through Steam and try playing on a 100% fresh install as that's what I have used when I have done any testing. Try switching back to x86 from the 64 bit branch too, just in case.

So, after playing on 32-bit, it launched fine. Switched back to 64-bit to see if an initial load would fix but it did not. Shame because 64bit is better performance but your map is really good and really well optimized so it's worth launching on 32 for me. Will enjoy it in 32 for now!
#2
Fishke  [开发者] 2023 年 1 月 30 日 上午 9:50 
引用自 Vovical：
So, after playing on 32-bit, it launched fine. Switched back to 64-bit to see if an initial load would fix but it did not. Shame because 64bit is better performance but your map is really good and really well optimized so it's worth launching on 32 for me. Will enjoy it in 32 for now!
I've tested the map on both branches and they'd always play well. Something else must be causing that error if that's what is crashing your game. Hope you enjoy it regardless!
最后由 Fishke 编辑于; 2023 年 1 月 30 日 上午 9:52
#3
jaffa 2023 年 1 月 30 日 上午 9:51 
引用自 Fishke：
引用自 Vovical：
So, after playing on 32-bit, it launched fine. Switched back to 64-bit to see if an initial load would fix but it did not. Shame because 64bit is better performance but your map is really good and really well optimized so it's worth launching on 32 for me. Will enjoy it in 32 for now!
I've tested the map on both branches and they'd always play well. Something else must be causing that error if that's what is crashing your game.
I'm not sure what it would be, I've tried disabling all mods, a fresh install as well now and it's always boned on 64 bit but is fine on 32 bit.
#4
jaffa 2023 年 1 月 30 日 上午 9:54 
It is running smooth on 32 for me though so I am enjoying my time with it. This map is huge and so detailed. You've knocked it out of the park again, insane as always
#5
N0_Noize 2023 年 1 月 30 日 上午 10:33 
引用自 Vovical：
引用自 Fishke：
I've tested the map on both branches and they'd always play well. Something else must be causing that error if that's what is crashing your game.
I'm not sure what it would be, I've tried disabling all mods, a fresh install as well now and it's always boned on 64 bit but is fine on 32 bit.
how do you get 32 bit because its also not working for me
#6
jaffa 2023 年 1 月 30 日 上午 10:41 
引用自 xX_Joystick_Xx：
引用自 Vovical：
I'm not sure what it would be, I've tried disabling all mods, a fresh install as well now and it's always boned on 64 bit but is fine on 32 bit.
how do you get 32 bit because its also not working for me
if you're on chromium branch it will be an option after hitting "play"
#7
N0_Noize 2023 年 1 月 30 日 上午 10:58 
引用自 Vovical：
引用自 xX_Joystick_Xx：
how do you get 32 bit because its also not working for me
if you're on chromium branch it will be an option after hitting "play"
i did that but then my game crashed
#8
Jo Fei Hung 2023 年 1 月 31 日 上午 10:16 
I had the same problem (crash) I was on x86-64 - Chromium=64_bit binaries.

I restarted the game by selecting none and then I restarted in x86-64 - Chromium = 64_bit binaries, and this to correct my crash problem, I can connect in 64 bit.

Thank you for this amazing map.
最后由 Jo Fei Hung 编辑于; 2023 年 1 月 31 日 上午 10:18
#9
< >
正在显示第 1 - 9 条，共 9 条留言
每页显示数： 1530 50