商店页面
密室逃脱模拟器
全部 讨论 截图 艺术作品 实况直播 视频 创意工坊 新闻 指南 评测

密室逃脱模拟器

商店页面
Escape Simulator >  创意工坊 > Elkondo 的创意工坊 > Never Spy 2 High (Part 2) (co-op) > 讨论
Never Spy 2 High (Part 2) (co-op)
描述 讨论1 留言52 改动说明
Elkondo  [开发者] 2023 年 3 月 28 日 上午 2:50
Walkthrough
1. The maze
Goal: Reach the Maintenence Access panel. It's right next to the enterance.
Hint 1: See that sign on the floor that says Crane Controls? That could be useful.
Solution 1: One of the players needs to use the crane controls. The other goes into the maze. Use the crane to raise the stacks of gold and open new paths. The maze player has to use color-coded buttons on the floor to open gates to move forward. Be quick, as they only stay open for a short time!

2. Maintenence access:
Goal: Complete the sequence to gain access.
Solution: This is a timing/precision minigame. When the sequence starts, the maze player will see the green area on the screen start moving around. The maze player can use the knob to rotate the red area, while the crane player can use the crane rotation controls to control the long yellow dial. The goal is for the players to keep the yellow dial inside the green zone, while also not touching the red zone for a certain amount of time.

Communicate well and use the red zone as a guide, as the crane player can see it as well.
As this puzzle can be hard with bad connection, there is a skip button at the bottom of the maintenence panel.

3. The cleanup
Goal: Learn the code to the door
Hint: The maintenence panel displayed some mysterious letter and number combinations. Could these be coordinates?
Solution: The letter and number pairs displayed on the screen are indeed coordinates. The crane player should be able to easily identify which spot in the maze these coordinates correspond to. As some of the numbers may be obscured by dirt, use the Cleanek bot to tidy it up.

Once the code is revealed, the maze player should enter it on the panel next to the crane controls. If you really can't solve it, you'll find the code underneath.

Code: 5814

4. Synchronization training
Goal: Synchronize all the interactibles (4 panels, 1 toy rocket display)
Hint: The rooms appear to be mirrored...
Spoiler: The general goal is to make the same light pattern appear on both players' panels. The patterns have to be mirrored horizontally however. Similarily, the toy rocket display needs to be set so it appears mirrored through the glass.
Panel 1:
Hint: The big button moves the 'snake' around.
Solution: Move the snake so it's in the same location on both panels. Remember about the mirror thing.
Panel 2:
Hint: The buttons look like a d-pad. What do they control?
Solution: Imagine that the buttons control an invisible cursor. When the cursor enters a new position, it flips the light (turns on if it's off, turns off if it's on). The easiest way to synchronize is to turn all the lights on or off (though I plan to change that).
Panel 3:
Hint: 5 blue buttons. 5 red buttons. A 5x5 grid. What's the connection?
Solution: Red buttons select the column. Blue buttons select the row. Pressing a pair of red-blue buttons switches a light in the corresponding position. Remember that the panels are mirrored, so column 1 is on the left side for one player and on the right for the other. Once again, the easiest way to synchronize is to set all the lights to either on or off.
Panel 4:
Hint: The panels for the players aren't exactly the same... Also, it's split in four quadrants?
Solution: The big button rotates the quadrants around. For one player the entire screen is just display, while for the other, one of the quadrants is interactive at a time (lower corner by the button). Simple copy the pattern so that the two displays match. Again, remember about the mirroring. Solution picture: https://imgur.com/PfoV4VJ
Rocket:
Hint 1: Only some of the rings are interactive. But they're different for each player.
Hint 2: Notice the rings have two distinct sides. Keep that in mind.
Solution: If one of your rings can be rotated, the same ring is static for the other player. Communicate, look around, and try to align the rings so that they're all rotated at the same angles. WIth the mirroring in mind, of course. When done correctly, the rocket should point roughly above the water dispenser.

Ending: If done correctly, you'll hear a jingle and the exit door will open. Walk through it and press the buttons simultaneously.

Thank you for playing. Part 3 is coming soon, so stay tuned for that.
最后由 Elkondo 编辑于; 2023 年 7 月 12 日 下午 2:22
< >
正在显示第 1 - 11 条，共 11 条留言
melsmeg 2023 年 4 月 3 日 下午 11:26 
Panel 4 is hardcore stumping us. we have tried so many variations of matching and mirroring were starting to think it does not work at all.
#1
Elkondo  [开发者] 2023 年 4 月 4 日 上午 3:22 
引用自 melsmeg：
Panel 4 is hardcore stumping us. we have tried so many variations of matching and mirroring were starting to think it does not work at all.
Hope you got through it in the end. I added a picture to the walkthrough just now.
#2
FeanorsCurse 2023 年 4 月 15 日 上午 4:52 
The panel riddle was really fun, but the planet riddle was basically impossible. Depending on your monitor you absolutely cannot tell which side is supposed to be shiny and which matte. They really need different colors on each side.
#3
Elkondo  [开发者] 2023 年 4 月 15 日 上午 9:29 
引用自 FeanorsCurse：
The panel riddle was really fun, but the planet riddle was basically impossible. Depending on your monitor you absolutely cannot tell which side is supposed to be shiny and which matte. They really need different colors on each side.
I genuinely thought this was the simplest one.
Sure, I suppose I'll change it then.
#4
FeanorsCurse 2023 年 4 月 16 日 上午 1:33 
Thanks, appreciate it. We both had the problem, but I cannot tell how common it is. The rest was pretty fun :)
#5
Beggar 2023 年 5 月 5 日 下午 5:02 
I agree the Planets Puzzle was frustrating, there can be a huge difference in those colors depending on the shadow/shader setting you're using, and because you're looking through the glass at your friend's rings it also makes it much harder to realize that the two sides of the ring are different, maybe put dots on one side and not the other.
Neither of us figured it out until we read the other comment mentioning it.
Otherwise you're doing amazing work.
最后由 Beggar 编辑于; 2023 年 5 月 5 日 下午 5:03
#6
freezily 2023 年 5 月 13 日 下午 2:01 
Panel 4 was extremely hard like undoable hard i feel like
#7
Melon4dinner 2023 年 5 月 26 日 下午 9:59 
For the planet puzzle, there are actually two ways to mirror the rings/rocket, but only one is correct. It drove me and my friend crazy, lol
#8
Steeloid 2023 年 9 月 10 日 下午 7:02 
The skip button for the maintenance puzzle doesn't work
#9
Elkondo  [开发者] 2023 年 9 月 11 日 上午 12:07 
引用自 steeloid：
The skip button for the maintenance puzzle doesn't work
In what way?
It's only meant to skip the screen part of the puzzle, releasing the cleaning robot. It always worked fine for everyone so far. If you want to skip the cleanup part, just use the code from the walkthrough on the panel and move on.
#10
Steeloid 2023 年 9 月 13 日 下午 8:39 
引用自 Elkondo：
引用自 steeloid：
The skip button for the maintenance puzzle doesn't work
In what way?
It's only meant to skip the screen part of the puzzle, releasing the cleaning robot. It always worked fine for everyone so far. If you want to skip the cleanup part, just use the code from the walkthrough on the panel and move on.

It didn't skip the screen puzzle.
#11
< >
正在显示第 1 - 11 条，共 11 条留言
每页显示数： 1530 50