Config is here!

c:\Users\YOUR-USER\AppData\Roaming\SpaceEngineers\Saves\YOUR-STEAMID\YOUR-SAVE\Storage\2640137506.sbm_WarpDrive\FSDriveConfig.cfg

Options are:

<maxSpeed>50</maxSpeed>
<startSpeed>1</startSpeed>
<maxHeat>180</maxHeat>
<heatGain>0</heatGain>
<heatDissipationDrive>2</heatDissipationDrive>
<baseRequiredPower>126</baseRequiredPower>
<baseRequiredPowerSmall>5</baseRequiredPowerSmall>
<powerRequirementMultiplier>2</powerRequirementMultiplier>
<powerRequirementBySpeedDeviderLarge>8</powerRequirementBySpeedDeviderLarge>
<powerRequirementBySpeedDeviderSmall>16</powerRequirementBySpeedDeviderSmall>
<AllowInGravity>false<AllowInGravity>
<AllowUnlimittedSpeed >false<AllowUnlimittedSpeed>
<AllowToDetectEnemyGrids>false</AllowToDetectEnemyGrids>
<DetectEnemyGridInRange>2000</DetectEnemyGridInRange>
<DelayJumpIfEnemyIsNear>30</DelayJumpIfEnemyIsNear>
<DelayJump>10</DelayJump>
<AllowInGravityMax>1.2</AllowInGravityMax>
<AllowInGravityMaxSpeed>3</AllowInGravityMaxSpeed>
<AllowInGravityMinAltitude>300</AllowInGravityMinAltitude>
<BlockID>IGNORE THIS NUMBER</BlockID>

Max speed right now can be set up to 100! but there is option to add more, need to activate AllowUnlimittedSpeed = true, your CPU will not handle too much above 100! trust me! limit is there for a reason.

So, MAX/MIN speed set what you like, min speed cant be higher than max, and max cant be lower than min.

maxHeat is parameter in seconds, so 180 = 3min If heatGain is higher than 0! and it's set to 1, if set higher then 180 / heatGain = time to travel till drive overheat and stop, to cool down. (auto)

heatGain is the Divider for maxHeat (TIME in sec) see above info.

heatDissipationDrive how fast heat is reduced when drive is not operational. default 2 will cool down drive in about 40sec

baseRequiredPower amount of power (in mw) needed for LARGE grid drive to start at speed 1 * powerRequirementMultiplier
So here will be 126 * 2 = 252mw speed 1.
If your min speed is set to 5 or 10 then 252 * min speed = needed power!

baseRequiredPowerSmall Same as above just for small grid!

powerRequirementBySpeedDeviderLarge This parameter is based on the MASS of the Large Ship!
So it's works like this, Needed Power per speed! * Ship Mass! Divided by powerRequirementBySpeedDeviderLarge
So higher this number, More power needed to move heavy ship at higher speed.
It's added to force HUGE ships to move slower than Light ships, or require huge amount of power to go faster!

powerRequirementBySpeedDeviderSmall Same as above! just for small grid ships!

AllowInGravity = false/true = allow to activate warp in gravity, or fly to planet atmosphere in warp with speed max 3km/s

AllowUnlimittedSpeed = false/true, if set to true, will allow setting max speed to any number, if false them max is 100km/s

AllowToDetectEnemyGrids = enable or disable the enemy detector code, takes true / false

DetectEnemyGridInRange = range from your grid center to detect enemy grid it's in meters.
max is 8000 meter

DelayJumpIfEnemyIsNear = if enemy detected how many seconds needed to charge drive. it's in seconds.
max is 60 sec

DelayJump = Time in seconds to delay jump and play animation.

AllowInGravityMax = Allow to use FSD in gravity if gravity is not above allowed config. max here is 1.8

AllowInGravityMaxSpeed = Max allowed speed in any gravity, can be set lower, but possible max is 3

AllowInGravityMinAltitude = minimum altitude in gravity to start FSD, or travel in warp. min possible is 300 meters.