订阅以下载
Stirling Gen Europa

This is my script for running the Stirling Generator automatically and without explosions.



The setup is relatively simple. Build a room with 3x3 foundations, walls around it, and the Stirling Generator. One pipe in and one pipe out.



I use a Smart Canister with 145 mol Volatile as the working gas.



The room pressure and temperature regulate themselves, and it also shuts down if the pressure gets too high and emits a warning if it produces less than 4kW. Furthermore, the room temperature is deliberately set to 30 degrees because I direct the waste heat into the base and heat it up a little more with a heat exchanger (not entirely unimportant on Europa).



To start the system, you have to press the master switch, which prepares the room with the generator. A red LED lights up during this phase and another LED says “waiting.” As soon as the LED turns green, you can pull the lever and the generator starts.



I have included a picture of the setup, but of course you can build it however you want. For error-free control, however, all parts from the diagram must be installed + a switch and a lever. Everything else is optional. For all the values, you can use consoles with a gas chip.



Two IC scripts are required for operation, as they are simply too small.

Be sure not to use flammable gases for the Atmo tank. The backup solution is optional and only switches on the generator when the batteries are too low.

Stirling Controller:
https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=3620298115

Atmosteuerung:
https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=3620342035

Optional: Batterieüberwachung um den Generator nur dann einzuschalten wenn die Batterien fast leer sind
https://psteamcommunity.yuanyoumao.com/workshop/filedetails/?id=3620408538

Namings for Operations:

Stirling Engine = Stirling_Engine

Lever= LS_Start

Switch = LS_Master_Switch

Digital Valve= DV_Cooling_Input

LED Light = LED_Status

Big LED Display = LED_Error

Turbo Volumen Pump = TVP_Coldgas

Pressure Regulator = PR_Hotgas

Gassensor = GS_Temp

small insulated tank= Atmotank

Active Vent = AV_Ausgleichstank

Digital Valve= DV_Ausgleich

Active Vent = AV_Druck_Raus

Active Vent = AV_Druck_Rein


Optionale Parts:

Digital Valve = DV_Abwaerme

Occupant Sensor = dSensor_Kontrollraum

Small LED Display= LED_Power_Used

Small LED Display = LED_Power_Gen

Cableanalyzer = KA_Stirling_Verbrauch