Obchod
RimWorld
Vše Diskuze Snímky obrazovky Obrázky Přenosy Videa Workshop Novinky Návody Recenze

RimWorld

Obchod
RimWorld >  Workshop > Workshop uživatele blues
163 hodnocení
Circuit Breaker
Popis Diskuze0 Komentáře58 Poznámky ke změnám
3
   
Ocenit
Přidat do oblíbených
Oblíbeno
Odebrat z oblíbených
Mod, 1.5, 1.6
Velikost souboru
Přidáno
Aktualizováno
698.797 KB
17. lis. 2024 v 13.40
7. čvc. v 10.35
Poznámky ke změnám (3) – zobrazit
Vyžadované položky
Tato položka ke svému správnému fungování vyžaduje všechny následující položky:
Vytvořil
blues
Offline
Prohlédněte si všechny kolekce (4982), z nichž některé mohou být skryté
25,047 unikátních návštěvníků
12,262 odběratelů
519 přidání do oblíbených

Klikněte na „Odebírat“ pro stažení položky
Circuit Breaker

Popis

📦 Overview

🕹️ Circuit breakers automatically switch off and stop power surges (⌁Zzzt⌁) from reaching batteries.

⚒️ Circuit breakers come with 10 fuse clips. After 10 triggers, they will break and need repair.

🪢 Line fuses don't require components, but are destroyed after a single trigger with a little emp flare.

🔎 You need to research Machining to build circuit breakers, Batteries to build line fuses.

📍They should be placed at choke points along power lines before they connect to batteries or generators.


⚡ Don’t Cross the Wires ⚡

❗ If there's an alternate path to your batteries without a circuit breaker or fuse, the power surge will take that route (literally short circuit) and cause mayhem ☠︎︎.

❗ Beware of the wires between a circuit breaker and a battery. To minimise the risk, avoid using long wires in protected areas. (Check the screenshots.)


⚙ Mod Settings ⚙

⚙ Hidden wires and powered equipment can now ⌁short circuit⌁ too; toggleable in settings.

⚙ Fuse consumption, battery drain, damage, breakdown risk, and notifications can be customised from the mod settings menu.

⚙ For a smooth update, a small check runs on map load to replace old breakers with updated ones. It’s safe and fast, but you can disable it in mod settings if no longer needed.


🧩 Compatibility

● Safe to add to existing saves.

● Removing with circuit breakers on the map causes a one-time error; saving again will clear it.

● Not compatible with other short circuit mods like RT Fuse.



🧱 Circuit breakers are made to be placeable on rocks, dirt, walls and gravship hulls. If you can't, but want to, please make sure:

☑ You are not trying to place them on existing cables, power elements or other stuff that might overlap.

☑ You don't have the circuit breaker retexture mod or any remnants of it's patch in your modlist.

💭 I know the wall-placing logic and the textures aren’t perfect for wall placement. But this is the closest I could get to making them both ground and wall placeable, because I don’t like clutter. If you’d like it any other way, feel free to make a mod for it and share.



✒️ My other mods:
Anti-Blight and Firefoam Dispensers
Blast Forge


Počet komentářů: 58
< >
Omega13 27. srp. v 2.40 
I would also love to see a version of this that does not require choke points, because presumably the choke points are incorporated into the actual devices and the wiring within the walls, since presumably a wire is not taking up the space of an entire wall. The chokepoint minigame is not difficult or interesting; it only serves to waste space.
blues  [autor] 17. srp. v 1.20 
@VelxraTV, separating batteries from the system with a circuit breaker is easily achievable in small circuits and small spaces (see the lower-left circuit example in the screenshots). That’s the whole point of this mod in its originality: a tiny challenge to call it a mod instead of disabling the event entirely.

If you really need that simpler approach, there’s RT Fuse, you can use that mod instead of this one. And if that still doesn’t work for you, you can simply disable the short circuit event. Because at that point, there’s really no difference between “no challenge at all” and... no challenge at all.

In short, no. I'm not planning to change the baseline code for that, at least until the next big game update forcing me to push an update.
VelxraTV 16. srp. v 15.56 
Could we have the option in the settings for the breaker box to count as protection so long as its attached in the system? Pretty much what the original mod did.

I like the design idea of needing to make a proper circuit. But this limitation has been very frustrating for small builds and space ships.
The Bard of Hearts 9. srp. v 13.00 
Well, if and when you decide you want to work on things, I'll be happy to be a helpful little prinny... dood. :d5_prinny: Game on... dood. :d5_prinny: :steamthumbsup:
blues  [autor] 9. srp. v 0.45 
The cable overlap thing seems annoying but i guess necessary since breakers has to be transmitters and able to cut of transmission when needed.
It could be made better, but not sure how, and i don't see myself doing it anytime soon.
I'm sure i'll love the dlc, thanks:)
The Bard of Hearts 8. srp. v 16.53 
Hmm... It IS working now. It may be possible that I was trying to place it over an existing cable. I thought I tried putting it on a blank wall, but with my Inattentive Disorder, I can't recall. Thanks for the mod work all the same. Hope you enjoy the dlc.
blues  [autor] 8. srp. v 1.48 
I installed the damn dlc, and checked it myself. I can place the breakers and the fuses on gravship walls and fly with them without problem. (Check the screenshot above) Make sure that:

- You are not trying to place the breakers on existing cables or other overlapping things.

- You don't have the retexture mod or any remnants of it's patch.

Other than that, every piece of code for breakers and fuses are the same, i don't see why else such thing would happen.

Safe travels. :theinterceptor:
The Bard of Hearts 7. srp. v 19.46 
I didn't even know there was a retexture out there for this. Honestly your textures work just fine for me. Regardless, still is as is. The fuse will go into the wall without problem. The circuit breaker will not. So far, flying the ship hasn't caused any problems with anything that is built. And I can build the circuit breaker on the ship's floor, just not the wall, like I can with the fuse.
blues  [autor] 7. srp. v 13.52 
Naah mate. They are kneaded from the same dough, they can't act different, the fuse and the breaker.

I guess you are using the "Retexture Mod", they patched the breaker to not be wall-mountable for some reason idk. If that's the whole problem, you can uninstall that mod and you're good.

But let me know again when you launch your ship, check whether the fuses or breakers can fly attached with the ship without breaking the hull pressure or something. No logs needed, thanks. :theinterceptor:
The Bard of Hearts 7. srp. v 12.11 
They can be placed on the gravship foundation but not on the gravship walls. In my current playthrough, I only just started using this mod and haven't tried launching the ship yet, but I doubt that will be an issue. The only real thing I noticed so far is that I can't place the circuit breaker in/on a gravship wall. The fuse, by the way, WILL go into a gravship wall. If there is any other way I can help, let me know. My debug logs may not be helpful, since I run 400+ mods. Thanks for looking into it. :megamanshoot::steamthumbsup: