does it require traffic ++? it would case a conflict problem in my game

It doesn't work!

After hours of testing, I can confirm that this is NOT broken for me since Sunset Harbour. Posting this in case people try to troubleshoot.

multi level subways are a must have, I mean look at real cities like Paris or London!.

Твое говно работает через жопу! Не могу на нижней платформе сделать остановку, постоянно цепляется к верхней!

Horrivel!!A plataforma de baixo nao funciona.

Advanced Buildings Editor seems to have fixed this asset, at least for me.
Here's a working link . I'll test this for a bit and maybe upload a fixed version (since the author doesn't seem to even visit Steam).

Screenshot: https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=1331945053

@Ja d'Attaque how do you repair it? i'm really interested in order to use these types of asset without mods enabled at all ^^ I sent you a FR

I have used BloodyPenguins tool (https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=790347696) to repair this so that the platforms both work correctly *without the need of a mod*. You should do the same, and update this asset.

neither traffic ++ or Multi track worked...

Doesn't work. The line that is further underground will not allow me to add stops. I have https://psteamcommunity.yuanyoumao.com/workshop/filedetails/?id=532863263 already. Still doesn't help.

Never mind works fine with this
https://psteamcommunity.yuanyoumao.com/workshop/filedetails/?id=532863263

I use Traffic Manager: President Edition, but even with Shift clicking I can't get any lines on the secondary tunnel. Am I missing something?

Not all platforms are working?

some wierd issues keeps braking network points - trains still run tho.

It's very useful and really helped !!! thx for the good workpiece!

@SirDennisKovchan
Use Traffic Manager: President Edition, it seem to be more compatible with other mods. I use more than 80 mods with no conflicts to my knowledge.

Can it be used without Traffic ++? Are there any other mods that can replace Traffic++ functionality? The reason why I'm asking is that Traffic++ causing a lot of problems and incompatible with some other mods I use.

Traffic ++ 2.0 no longer allows for the lower route to snap anymore.

Nice, but you should make people from the lower platform to get in and out the station through the stairs, just like the other platform·

Hey, it somehow doesn't work anymore. I have Traffic++ v2 installed, but when I hold left shift and click nothing happens. It worked a few months ago but not anymore. Any help?

Works great with the Multi-Track Station Enabler 1.1.0

One more votes for what Fata Hoku has just said.

Not showing up anymore. Anyone having the same issue?

Please update the description to be REALLY EXPLICIT that Shift+Click is required to set steps on Platforms 3 & 4.

Hi @ricl, thanks for your contribution, I really love these multi-track stations. Wondering if you would make metro stations with multiple exits/entrances, just like how metro stations in the world are. I'm dying to have one so that my citizens do not have to cross roads and walk on lengthy ugly pavements above ground..

Hi @ricl, thanks for awesome asset. I often have metro trains got stuck on 4+ metro station (maybe I'm wrong and they got stuck on stock stations too) - any ideas of how to resolve this? I have ARIS stuck vehicles removing mod, but timeout for "stuck" detection seems to be a bit high and as a result one of my lines completely stops for some time.

@Joel: Use Shift/Click (with either Traffic++ or MTSE) to set routes to platforms 3&4.

I need help. I can't set stops to the second platform. I have Traffic ++.

my citizens really really like those stations you made. awesome job and big thx ;)

@oddacious

It also helps when choosing the 'vertical' (in your examples) to ensure you are on the 'right' tunnel level. If you 'look' at the station from a diagonal position, you can see more clearly which level you are choosing.

@oddacious

You can only make routes when there are physical tunnels connecting the two platforms/stations.

From the look of the picture, you are trying to connect 2 stations that do not have such a connection. If you loopback the ends of the platforms on those stations you have with some sort or U loop, then they should connect fine.

Or, for example, here's two stations that CAN connect, but only in one manner.

http://i.imgur.com/AeeReox.jpg

If I shift+click the first station, then click the second station, it will connect with that line.
If I click the first station, then click the second station, it will connect with that line.
If I shift+click the first and shift+click the second, same.
If I click the first and shift+click the second, same.

I can't make them take the vertical route. All combinations lead to the same route.

Hitting shift before I click DOES make the little dot move incrementally inside where the platforms are, but always right next to where an unmodified version of a subway station would be, never where it looks like it's going to go on the other path instead.

I think I'm doing that.

So here's my experiment: I want to connect just two of the stations I placed. Click the first station to make a new line, get the little "new line" sprite. All good. Not sure whether I'm on an upper or lower platform (how do you tell? I'd guess my placement is all haphazard, but I used snapping, so they should at least go up and down to meet the connection), so at the next station, I click to make a stop on the line I already started. I get the new line sprite. Dang. Okay. Right click to remove the second new line, now try shift+click. Nope. Also gives the new line sprite.

Sometimes I can make a stop or two in a row before I get to one that won't connect.

Maybe it's because of the way I connected all the tunnels? Maybe they just look like they're connected but really aren't? What can I do to help diagnose the error? I'm sure it's my lousy playing, not your asset.

@oddacious

Are you using Shift Click to place routes on the lower platforms and Click to place them on the upper platforms, as both Traffic++ and MTSE require?

You can either start a line of one of the platforms or make a stop in an existing line. Whichever you require.

There must be a physical tunnel route to get to the station from where you started the line however.

I placed a bunch of stations in a grid pattern and connected them to each other like:
+++++
+++++
+++++
and planned to have some lines run N-S and some lines run E-W. When I go to click on stations to make a line, though, when I go to the next station, it gives me the dot for a new line, not a connection to the line I already started. I have Traffic++ installed. What am I doing wrong?

@Treachable

np. Now just remember to uprate and favourite it so that others can find it faster

thank you so much! great mod!

@ arisian

One 'trick' you might need to know. There have to be pedestrian 'Loading paths' at right angles to the centre of the Metro Station Tracks. +-8m in length.

http://psteamcommunity.yuanyoumao.com/workshop/filedetails/discussion/442957897/613958868352039116/

For SimFirehouse's (MTSE) tutorial all about manipulating the paths.

@ arisian

Basically you can add extra paths using the Advanced Building mod. This includes Metro Station and the pedestrian paths.

So,

1. Choose Asset Editor, New, Building, Metro and then any Metro station.

2. Make sure the 'Import Decorations' check box is ticked if you want the existing 3d Model and Decorations.

3. Add any extra paths you require. Be careful as most cannot be deleted (unless you can re-type them to one that is bull-dozable with HexEdit).

4. Push the end points of the paths around with HexEdit following SimFirehouse's excellent tutorial.

5. Save and test.

If you wouldn't mind offering some advice, how to you get the metro station tracks in the asset editor for this? In my past attempts at creating metro stations, I have never been able to make the tracks function properly. Is there another mod you're using to access the track segment? What needs to be done to get the pedestrian paths to connect properly?

O. M. G. Wow.

Game changer! Love this station, makes subways may more effective

Awesome! Maybe can you also do a simple 2 platform version at a right angle with the street?

And is it also be possible to create metro stations with multiple entrances? (on each side of the street)

@se_kllstrkr68 Great. Feel free to skin this (or the other one) to any fbx model as required.

Just import it into Asset Editor using New, Building, Metro and then this item and choosing your fbx over the supplied one to complete.

@ricl
Thank you!

I did not have the time to change the coordinates and so on (btw: found a nice simtropolis thread to do this), but I managed to add some random tracks and paths to the small and normal Inner City Metro by Fishbus and replaced them afterwards with the paths and tracks of your metro stations to create 4 new metro stations that fit to the others very nicly and work even more fantastic! ;)

@se_kllstrkr68

Hex edit be your friend :)

I have tried already on my side to create more-lane-metro-stations with advanced building-mod, but I was never able to create Underground Pedestrian Connections deeper than the default level, so my question is, how you managed to make those paths at -12m level for your second track?

Btw. very nice work and thank you for publishing!

You should never delete a Metro Station (or a road with a bus stop on it) without first removing the Routes that are using it.

If you do so, you leave a 'phantom' stop which will/may magically reapear on anything you later add.

Delete the Routes first. Delete the Station/Road afterwards.