Thanks @Hitman

@silverchin Yes. Check this to find out what config you need to edit. And in the config file edit this line:

head_offset: (0.533, 2.2, 2.2)

is it possible to raise the height of the pivoting roof camera?

@XEBEKzs : You can find the full path, and name of the config file — here

Lean Out Camera fov100. In what file and what name can I change fov100 to fov90 or less?.

@XEBEKzs : Yes, it's possible, and i have plane to do it on the future updates. But only after i make update for ATS, that i already made for ETS2.

I need to make total rework of this mod, before i go to make an implement something else/new.

So for now: in version 1.4.0 i update configs for every trucks that this mod support for now, with adding new things, improve old things, and etc.

And only after 1.4.0 was appear, i make increase for the seat adjustment limit too.

@Hitman Thank you for your answer. Can you increase the seat adjustment limit?

All type of changes that we make with our view — it's the "camera settings".

And everything that we physically (visibly) change inside the cab:
● Steering wheel height
● Steering wheel position
● Position of mirrors
etc.

It's the "Animation". And all kind of animations directly bounded with the truck model, and with truck physical config too (with the: weight, size, suspension, etc.)[/]

So for example: if i add some truck in this mod, and in future this truck gets the "8x4 chassis".
The whole physic of that truck will be broken because of this mod.

And that's not something that I want to happen

@XEBEKzs : Hi. In this mod — no, i'm not.

Because it's can cause a conflict with other mods, for e.x: mods that only change the mirror's fov .

And if you're asking about limits in the settings of mirrors (where you change the angels of mirrors) — the answer is the same, no. Because these settings placed in master config of the truck.

And if i put it in this mod, and after that the original author make some update for his truck, and make some changes to the same file too — these changes will be ignored because of this mod. Which will make cause a bug and even a crash.

So, it's too dangerous to make that kind of changes

Hi. I have a question. Would you increase the mirror adjustment range?(Wide Angle Mirror). The default range is sometimes not enough.

@xtracontinent Thanks! Glad that you enjoy it

You have the best mod in ATS hands down!!!

Thank you for this. I just want to see the hood while outside on the roof. You are awesome

@hitman I use a controller, the left stick used to move the camera, is nice and fast but the right stick, used to look around with, is painfully slow, i've discovered that using the mouse as the right stick too turn with is nice and fast tho!

@silverchin : I increased the speed, but i didn't make it superfast. Because you need smooth photo camera, to make good photos. And, photo camera itself don't have any type of changing speed, or something like that. You only can fly around via WASD, and change your height via Q & E

I've increased the speed of the camera in photo mode but how do i make it turn/look around faster?

Ok

@Legend : No, it's suddenly impossibly
This camera, restricted by game logic — to don't have any movement of your view.

And if i add some commands to config file of this camera (mouse sensitivity, or allowed angels of rotating to the left/right, etc) = game simply crashes on loading screen

That happens, 'cause game see unknown commands in the config file = which means, that is impossible to make camera rotating or someone else, excepts been fully static

By far favorite mod great job. One request can you make it that the hood view can rotate left and right

@Anthony Zero : That function exist only on trucks with sleeper cab as only possibly to buy (if truck has day cab and sleeper, it wouldn't work)

In list of vanilla trucks, only «Kenworth T680 2022» have "only sleeper"[/i] cab.
Other trucks have both of them. And in that case, there is no "lie down on the bed" animation for these trucks and cabs.

How can I get the camera to rotate so I can lie down on the bed? I can only get it to rotate to the passenger seat and out the right side. (I have the sleeper cab installed.)

@PZ : Glad to hear that!

@Hitman Your advice was excellent! But it was not one of the in-game settings. I looked at those and everything was okay. However, some time ago I installed the Beam TrackIR system and did not like it so I uninstalled it. However, it left a config.cfg setting at the wrong state: uset g_trackir "1", which should be uset g_trackir "0". I changed it and now have the Camera mod working again! Thank you so much for your help!

@PZ : I was checking today, change mouse setting to caring the steering wheel and use key bind to toggle on/off viewing by mouse — and everything works fine.

So, maybe, your settings was accidentally toggle on or off something?
Or your key bind for viewing by moving the mouse was unbound?

@Hitman Thanks for the reply! I created a new profile and am using only standard SCS trucks (Volvo VNL right now). I think the problem is something on my end (not your mod) because I also tried the Pivot Camera mod which I used before and now is also not working. Normally I do not care if a mod does not work, and simply move on, but your camera mod is my favorite of all mods I have, and I was hoping you might have heard about this happening to some and maybe what to do about it.

@PZ : On what truck did you try to use the "pivot camera view (key 5)" ?
If you try it on some mods truck, it may be unsupported yet. Or it's mod truck start to have individual "Lean out cam" conf file, and when i make this truck to supported by my mods — this conf file doesn't appear yet.

Or, you're talking about a default truck?
It's not enough starting information to get some conclusion

The pivot camera was working fine and suddenly it does not pivot. I have not changed anything, and even tried a new profile with only the camera mod added. I can still see the pivot camera view (key 5), but it does not move when I right click the mouse and move. Any idea what might be wrong?

Ok thank you

@silverchin No, the roof camera nailed to the roof itself, and its not pivots at all. And yes, it can be changed fov or position. And the "pivots roof cam" it's the Window Lean out camera. And it also can be changed the fov and position.

is the roof camera the one that pivots? if so is it possible to change the position/FOV ?

@defragekb : Если после внесения изменения, в игре никакого эффекта не было замечено. Но при этом изменение соседнего файла прошло успешно — вывод один: Что-то ещё, перезаписывает первый файл. Для чистоты эксперимента, совету создать новую, "чистую", учётку водителя. Или хотя бы, как минимум, отключить вообще все моды (кроме этого) на основном профиле. И уже после этого, пытаться что-то редактировать.

@Hitman : но никакого эффекта от этих изменений я не заметил. также как и при попытках изменения значений параметра camera_offset во всех файлах bumper_*.sii
Так что не понятно почему эти изменения игнорируются. отключал и другие моды кабин/траков.
Зато позицию камеры "из окна" без проблем удалось изменить редактированием файла window_kenworth_w900.sui в той же папке... то есть не может быть, что я что-то не то и не там менял...
возможно, что-то еще где-то переопределяет именно эту камеру. попробую еще раз перепроверить все.
Еще раз, спасибо за подробный ответ!

@Hitman : благодарю за исчерпывающий ответ! да, для начала я пытался менять в твоем моде и в том числе в bumper_basic.sui по тому пути, который ты указал. цифры в параметре camera_offset менял как с небольшим шагом (примерно понимая насколько мне нужно поднять камеру), в частности 2-й параметр (мне только его и нужно немного увеличить, получается), так и вообще ради теста менял все параметры на 10, таким образом факт применения этих параметров был бы более, чем очевиден.

@defragekb : И если ты хочешь сделать свой собственный локальыный мод, вот ссылка [drive.google.com] на мои заготовки для этого. Чтоб с ними взаимодействовать, используй любой архиватор, который может работать с .zip форматом (WinRAR, 7zip, итд)

@defragekb : Что касательно "camera_offset:" , (0,0, 0,0, 0,0) — первое число это горизонтальное смещение, второе это вертикальное, третье это смещение вперёд/назад.

Чтоб отредактировать эти значения:
Либо - Зайди по пути: ...\Steam\steamapps\workshop\content\270880\3006377097\universal\def\camera\units\bumper_basic.sui и отредактируй этот файл именно там. (Но твои изменения будут сбрасываться, если выйдет обновление на мод)

Либо - Создай свой кастомный мод, и загрузи его в игру, через "Мои документы\American Truck Simulator\mod\". И в самой игре, в модлоудере, поставь свой мод, выше любых модов на камеру.

@defragekb : Вообще, все настройки камеры с видом от бампера, находятся в конфиге «bumper_basic.sui». В большинстве случаев, все грузовики, даже из модов - используют именно дефолтный конфиг. Я пока что не встречал ни одного грузовика, который был бы исключением из этого правила.

Но, если таковой когда-либо появиться — посмотреть что он использует, и где оно находиться можно в файле «camera_storage_*имя_грузовика*.sii». Он лежит в архиве «def.scs» → папка def → папка camera. Там, в самом конце через команду @include подгружаются конфиги с камерами для грузовика.

@Hitman подскажи пожалуйста, где что поправить, чтобы поднять камеру бампера (кнопка 6) выше до уровня глаз водителя?
камера бампера кажется низковатой даже в твоей модификации

Пробовал сам найти и менял цифры в параметрах camera_offset во всех файлах, где содержится слово bumper, но как будто они вообще никак не влияют. либо я не в тех файлах менял.
пожалуйста, укажи какие файлы ковырять на примере Kenworth W900
Заранее спасибо!

Works good for me! Thank you!

🐅 Red Tiger 🐅 Thanks

Great mod, thanks for keeping it updated.

That's okay. Thank you for the reply, I love this mod regardless

Ohh i got it. Unfortynatly the gaem use two model for the truck.
When we use Interior Camera game use on ditaled model of body.
And when we use any "outside" Camera, game use low ditailed model of body.

So yeah, it's impossibly to fix it

It's the "On Wheel Camera", those mirrors on the Hood don't function.

Oh I'm sorry. What I meant is that the mirrors that are actually on the truck itself do not work when outside of the cab. Yes, the F2 mirrors work fine, but the Truck Mirrors do not unless you're inside the truck. (The Mirrors on the Front Hood of the truck) Is there any way to make those work outside or is this impossible?

@Steele : Idk, i don't have any problem with the overlay mirrors, check the screenshots:
Interior Camera
Chasing Camera
Top-Down Camera
Roof Camera
Lean Out Camera
Bumper Camera
On-Wheel Camera
Drive-By Camera

I notice that the Mirrors do not work when the camera is on the Hood. Is there any way to make that an option, or does the game make this impossible?

@Kevin11plus : Open the ''seat adjustment'' settings, [www.dracotorre.com]
and change it whatever you want

Western Star 5700xe camera should be go up a little more please!!

@davewhitney63 : u welcome, Dave

Thank you for your mod; Yeah I tried that swapping commands. I have my lean out back that is good enough. Love the other views, Thank you again.
Dave