@Cigaro But be warned that DAS script is a bit old and hadn’t been updated for a while. So try to use this rover without it if you encounter any problems. But in this case you should tune the wheels manually.

@Cigaro Glad that you like it! Have a nice ride!

Oh ok, I thought I did something wrong, thanks for the heads-up, really nice blueprint

@Cigaro DAS script can take advantage and control of many systems some of which may be unnecessary. FDS and SDO controls thrusters, ArtificialMassSubroutine controls artificial mass blocks and BackupBeeperSubroutine controls designated sound block when the vehicle moves backward. This rover lacks any of those so you can just ignore these messages as they simply inform you that the script couldn’t find these blocks.

DAS.FDS Failure
DAS.SDO Failure
DAS.ArtificialMassSubroutine Failed
DAS.BackupBeeperSubroutine Failed

Any idea why this failed? I installed all the scrips (I think) And I'm currently spawning the ATV in creative because this has the same errors as the one I welded in survival.

@bor0daplay. Mods and DLCs are two different things. And I've mentioned this in the description:
Decorative Pack is mandatory for industrial cockpit
https://psteamproxy.yuanyoumao.com/app/1049790/Space_Engineers__Decorative_Pack/
But still you can place there a regular cockpit instead.
It was not intended to look that way though.

how is it no mods, that cabin is the mod feature....?

@Axel-of-Atheara, here's an excerpt from DAS script description:

Gyro Stabilisation & Assisting
GSA takes control over gyroscopes of a vehicle. The orientation of gyroscopes in a vehicle doesn't matter. Following functionality provided by GSA:
Aligning to the gravity vector, or surface curve. Surface curve evaluation requires a downward camera(s). In midair fall GSA will slightly tilt vehicle up to preact for landing.

@gar_krol, what is the camera on the belly for?

@Axel-of-Athear, gyroscopes are controlled by the DAS script (there's a link in the description). There are several blocks needed for this script to function properly. Usually the described behaviour occurs when the script is running, but there is no remote control block for this script to align with. So try to follow steps 8 and 9 in the description to avoid this.

Oh, Are the gyroscopes supposed to be on override? That is what was causing my issues apperently.

@gar_krol, Yeah I was the one who missed something. I forgot to build the conveyor tubes behind the cockpit. I did have another question, how would you recommend I start building one in survival? I tried building it on a pole connected to my base via a rotor, unfortunately, when I ground the connecting block off in my creative world, it clanged out and started rolling around. Obviously, I don't want that to happen in survival

@Axel-of-Atheara, well... You must have missed something. H2/O2 gen is connected directly to oxygen tank, which is connected to rear right cryo, which is connected through conveyor system to everything else. I've doublechecked it just now. Ice is going fine all the way to H2/O2 gen through connector. Maybe your conveyors are damaged somewhere.

@gar_krol, I was building this on my multiplayer server and I was wondering if you know that the H2/O2 gen isn't actually connected to the survival kit and that it's also apparently inaccessable from the connector. was this done intentionally?

@Yohrus, Bonjour. Si je comprends bien, vous rencontrez des problèmes pour ajouter des roues en mode survie. Essayez de suivre ces étapes avec la projection activée, sans rien placer à la main et sans accéder au cockpit jusqu'à ce que tout soit terminé:

1. Construisez tous les blocs entre les suspensions
2. Construire des suspensions
3. Accédez au panneau de commande en appuyant sur K sur le port du convoyeur Hydrogen Engine
4. Dans le panneau de commande, sélectionnez toutes les suspensions de roues qui ont des roues et réglez le décalage de hauteur sur 26,0 cm
5. Dans le panneau de commande, sélectionnez toutes les suspensions de roues qui N'ONT PAS de roues et appuyez sur le bouton Ajouter une roue
6. Dans le panneau de commande, sélectionnez toutes les suspensions de roues et réglez le décalage de hauteur sur -32,0 cm.
7. Quittez le panneau de configuration et continuez la construction avec la projection activée
8. Lorsque vous créez les blocs programmables, accédez au Progblock DAS via le panneau de configuration et désactivez-le jusqu'à ce que la construction soit terminée.
9. Lorsque la génération est terminée, activez le DAS Progblock et recompilez le script.
J'espère que cela aidera

en tout cas ça me donne pas envie d'aller plus loin dans le jeux trop c'est compliquer, avoir fait tout ça pour rien ne motive pas du tout

Bonjour je suis débutant, et impossible de mètre les roue j'ai tout tester est rien a faire!!!!!
c'est bien dommage parce qu'il est super chouette

@AngryDuck!, I've tested it today for a while and it it was ok. Despite the old version of the script. I can't update the blueprints with the new version of the script anyway. I stuck in another city away from my main PC. So sorry about any inconveniences. In your particular case — maybe it's just that you've got difference ownership of the parts of your ATV. Or you've lost some crucial parts and rebuild them but didn't recompile the script after that. Or something. It is always easier to unify ownership and add latest version of the script though. That's why I've suggested it first place. Anyway, good luck and thanks for choosing Kamba ;)

I'm guessing the version in the Kamba-E blueprint is out of date then?

I'll give it a try, thanks :)

Hello, @AngryDuck! That's a bit strange. And I can't check it at the moment. Try to update script to it's latest version.

DAS - Driver Assisting System by Wanderer_308
https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=1089115113

You need to subscribe to this script in Steam Workshop, then in the game select the Programmable Block > Edit > Browse Workshop, add newly subscribed script from the list, press Check Code and OK. Also check that all of the blocks are owned by you.
Hope this will help!

I'm having a recurring issue with the wheels on this build. Periodically, the wheels will start either working against each other, or the two front and two rear wheels will lock and only the centre two wheels will drive. The result is that the rover becomes locked in place (or if it's in motion, it'll flip and roll and spin itself apart). It takes a relog to get it to start working again.

Is this an issue with the script? Disabling and rerunning the script doesn't correct the issue, and I don't have this issue with any of the other wheeled vehicles I've built, so I don't think it has anything to do with the wheels themselves. I don't know anything about how the scripts work, so I can't figure out if there's any issues with the code itself.

Any idea what's causing this?

@Uurinho, thank you! I'm glad you've made it!

finally i can do that but i dont know how :D awesome atv keep it up wait for the new ones

oh i think my fault. " without placing anything by hand and without accessing the cockpit until the whole thing is complete" i think i skipped this part. i build cockpit first. i try one more time without the cockpit. thanks for explanation.

@Uurinho, sorry about that. Try to follow these steps with enabled projection, without placing anything by hand and without accessing the cockpit until the whole thing is complete:
1. Build all blocks between suspensions
2. Build suspensions
3. Access the control panel by pressing K on the Hydrogen Engine conveyor port
4. In the control panel select all the wheel suspensions that HAVE wheels and set the Height Offset to 26.0 cm
5. In the control panel select all the wheel suspensions that DON'T HAVE wheels and press Add Wheel button
6. In the control panel select all the wheel suspensions and set the Height Offset to -32.0 cm
7. Exit the control panel and continue building with enabled projection
8. When you build the programmable blocks, access the Progblock DAS through control panel and turn it off until the build is complete.
9. When the build is complete turn on the Progblock DAS and recompile the script

Hope that will help

this is very good but ı cant add the wheels :(

@Mittons, I'm very glad that you like it!

@gar_krol many thanks and it was an excellent design to start with, the cryo pods being especially helpful on the server.

@Mittons, sure! You are welcome! Nicely done! And thanks for the credit ;)

I have published so that my server can start using it before waiting:

https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=1988464347

Credit to you is on both workshop pages, let me know if there are any issues.

Hi there - May I please have permission to republish a heavily modified version of this?

I have removed the scripts, changed the cockpit to vanilla, added some blocks to the sides, repositioned and changed the side LCDs and coded it into a respawn vehicle for my servers use (one version with Build & Repair and one without).

I will provide credit and links back you and this page.

the cybertruck is a masterpiece and masterpieces cannot be rushed. if it takes 4 centuries to create then that is ok. as long as im alive to see it

@long chin man I'm flattered and will give it a go as soon as I'll get to my PC which is in another town at the moment. And alas, my laptop is not suitable for this task.

no i want a gar_krol cybertruck

@long chin man
Lol )) Someone made it already ))
https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=1918688045

tesla truck when

@MadMax, well try to use DAS - Driver Assisting System by Wanderer_308
https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=1089115113

Lol, I have almost similar project, but yours is more stable in driving, good work)

@{M.I.T}OrcaMozes, thank you! I'm glad, you like it!

Awesome craft! One of my most favorite nowdays ATV's for solo Mun survival missions. That beast are amazingly stable and reliable. Good job, well done!

@MatteiusPrime, heh :D Nice one. Well, load it up and have fun! ;)

From the thumbnail my thought was... Did someone make a garbage truck?

@militaryk3, as I said earlier to @GonSAS — try to follow these steps with enabled projection, without placing anything by hand and without accessing the cockpit until the whole thing is complete:
1. Build all blocks between suspensions
2. Build suspensions
3. Access the control panel by pressing K on the Hydrogen Engine conveyor port
4. In the control panel select all the wheel suspensions that HAVE wheels and set the Height Offset to 26.0 cm
5. In the control panel select all the wheel suspensions that DON'T HAVE wheels and press Add Wheel button
6. In the control panel select all the wheel suspensions and set the Height Offset to -32.0 cm
7. Exit the control panel and continue building with enabled projection
8. When you build the programmable blocks, access the Progblock DAS through control panel and turn it off until the build is complete.
9. When the build is complete turn on the Progblock DAS and recompile the script

Hope that will help

How come the wheels cant spawn in on Survival Mode?

oh hot lol thanks i shoulda realised

@ONE HUNDRED MILLION, You need the Style Pack DLC for the textures. Not the Decorative Pack. These are two separate DLCs

yea decorative dlc the beds industrial cockpit etc. i only got the clean texture though and thats it. il try it tomorrow n see if its still weird and look into the issue

@ONE HUNDRED MILLION, Hm.. Try to ask support.. Or maybe you've got the wrong DLC? There are three of them

i have the dlc but i only really got the "clean skin" texture for my colour palette. i have all the blocks etc but its just not showing at all and its pretty strange tbh. any ideas?