Taxidermy but better

i love this mod

i love this mod looks really good, using on my server with many other mods

Thanks Morbitz for the effort !!!

Summoning Commands posted and pinned

ok morbitz i wait well i am in no hurry i thought just ask it
because I think it's a nice mod and i like it

@hansvanderloo
I will get some admin codes together for easy summoning.
(it might just take me a bit)


@DeltaBlaze8201 (Cuddles)
I agree completely about the radial menu, unfortunately this was my first time attempting to mod anything. Most of my knowledge is coming from you-tube, and trial and error. So far, I haven't learned how to do it yet.

I would like to be able to switch between a few poses and possibly textures for each statue. I believe that would be the best.

Thanks for the encouragement, I will keep improving.

If I may suggest, instead of having multiple different varients of the statue, you could possibly have them be selected in the radial menu. For example if I had a regular standing pose for a statue, but I wanted to swich it to say... Having the Rex go from regular to the roaring pose, it could be selected via radial menu rather than having it be an entirely different statue. Of course this wouldn't be as realistic as having to make a new sculpture, but then again it would be more efficent. I'm not a modder so I don't know how hard it is to make changes like that, but thats just my two cents on it. The statues look lovely by the way and I think you've been doing an exelent job. :)

can someone tell me where to find the admin codes?

These are looking real nice! thanks!

Well my friend, I have returned! Your mod is now installed again on my server, which is now a *very* heavily modded server (28 mods and climbing), and so far it works great! Can place S+ items :D Whatever you did, good job!

I will definitely make a set of smaller statues.
I have been trying to get different poses on a radial wheel but haven’t been able to figure it out yet.

Mod Works!!! I guess it didnt play well with Cute Hair Mod. Also I have a suggestion. Can you make some statues smaller? like to sit in a throne room. Display inside a building.

I deleted Cute Hair mod and i think it works now. worked on my home server now just trying it on my hosted server... fingers crossed @Morbitz

I just tried the Island, but could try them on Olympus in a couple of days

@Morbitz Which map did you use if that matters?

@laconic187

I tested the Following mods at the same time without issue

Difficulty34+
AKU SHIMA
Additional Armor Sets
Cooking Extras
Pet Cemetary
Simple Statues
Perfect Hair
Vault Collections
Structures Plus S+
Castles Keeps & Forts
Super Spyglass
HG Stacking
ACM V2.7
Utilities Plus
Editable Server UI
Automated ARK

So far I found no Problems.

Now with that said... After so many mods you are bound to have an issue somewhere.

I think the only two you that you listed and I did not get to yet is Boosted Fabricator and Eco's Shoppe Decor.

I will take a look at those mods when I get more time.

@morbitz Thank You

@Speculus
The Dodo Alter was to be placed on the ground only. I have updated it to be placed on foundations. Soon as I update to V2.1 and thanks.


@ laconic187
I am looking into it... it is just time consuming and will take awhile.

Nice work sir. I have an isolated problem however. So far, everyone places but the dodo altar. I keep getting a "no snap point". We are running S+ mod. I tried to place the dodo altar on both S+ and vanilla stone floors with the same results. Any ideas? With that aside, we really like this mod!

Thank you, Morbitz! It's working perfectly now! :)

Does this mod conflict with any of these mods
Difficulty 34+ http://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=515417479
http://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=558079412
http://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=924619115
http://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=899250777
http://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=812655342
http://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=806480270
http://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=942185438
http://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=742077869
http://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=731604991
http://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=895711211
http://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=764755314
http://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=849985437
http://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=778345456
http://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=902548451

I have an idea! In real life, this may scream away animals! Maybe you can add that effect? Cool, gonna use them!

Updated

I am fixing that right now

Update: Problem figured out. You can not fly while placing the Statues. Your feet must be on the ground.

So it happened like this; I placed a Dodowyvern it worked fine. When I tried to access it though, nothing came up. I could not even see the HP or menu prompt when I tried to destroy it. So I used a Demo gun and shot it. It went through the statue and demo'd the ceiling underneath it, thus destroying the statue. After that, I crafted 4 Direwolf statues and tried to place them, but I could not. I had them in my hot bar, but when I pressed the 0 button, the statue outline shadow thing didnt show up. When I clicked to place it, still nothing. An hour later, I tried the Dodowyvern Statue again and could no longer place that either. Again I had it in my hot bar and when I pressed 0 to place it, nothing showed up.

Hi ClamSlam

I could not duplicate any placement errors with the Direwolf

I’m unsure if this is an isolated problem or not, but I can not seem to place the Direwolf statue. I was able to place the Dodowyvern earlier, but the Direwolf does not show up when I try it from my hot bar.

Cool beans

I added a couple of Dodo themed Statues and an Alter. I am sure I can add an additional Dodo Shine with Pillars.

thats coolz

If or when you get to making a dodo statue make it like a dodo shrine, with little pillars in the roman style on the corners of the base, would be awesome. Also looking forward to boss statues, wich i would love to see no bigger than mammoth sized

@PureSpirit
Thanks for the info. I really appretiate you taking the time and letting me know what was going on. I definetly will do more testing. and let you know what I find.

@AnnePlaysPC
I really iked the video, you did a great job. The audio was hard for me to hear, I found it very low. That could just be me and my setup though. I never would have expected this much attention

Thank you

Hey Morbitz! Hope you like this and feel free to use it if you do https://www.youtube.com/watch?v=D_8qH2-_rkU .I made a mod review for this mod (heads up I really love it) I'd also like to let yah know that I had over 20 mods going and this mod worked perfectly alongside all of them so thank you! I hope my video is nothing but good. lemme know :)

(part 2...more than 1000 characters lol)

There are a few other mods as well, however they do not match between the two, so one would assume it wouldn't be one of those. Hope this helps! If you still can't find anything, I'm happy to re-enable it and give it another try!

Thanks for giving it a test, we are running a few mods, will list them below for you. A number of things were attempted, including a foundation, mortar and pestle, and a tek transmitter. This was also done across two different servers within one cluster, running Scorched Earth and Ragnarok, with a person testing on each. After removing the latest mod to update, being this one, all was working well again. I'm very happy to accept it's a conflict else where though, not putting blame on you don't worry :D

The mods that match across both servers are as follows:

Primal Fear
Resource Stacks 2.0
Reusable Plus
Platforms Plus
Flyer Landing Pistol
Dino Aid
Classic Flyers
Death Recovery Mod (v1.8.1)
ACM V2.7.1294
Meat Spoiler
Structures Plus (S+)
BeaconPlus
Backpack
SelVision

Hi PureSpirit,

I could not find the conflict between Simple Statues and Structures +

I have tried it placed before and after S+ in the Mod List.
I had no problems placing - picking up and placing again with any of the Structures I tried.
(Note you can't pick up the statues).

There is a lot to S+ so if you don't mind... Could you tell me what you were trying to place or build that was causing an issue.

If there is a problem, I want to find it.

Are you running any other mod Besides S+ ?

Thanks

Soo unfortunately I've had to remove the mod..It's got some serious conflicts with S+. Unable to place any of the S+ building materials. Have since uninstalled your mod and everything works fine. Will keep my eye on this mod though, I really like it, but might be worth doing some testing with S+. Can confirm this happened on at least 2 of my servers, didn't test the 3rd.

I finnally added some images... tI hope this gives a better display the statues and what I have been working on.

Thank you, I'm thinking of using this. Might ask a friend if it can be used on a server.

I plan on getting more pictures up soon.

Can we see more pictures of any other statues?

Installing on my three servers! Cute mod, looking forward to more statues!

You say this mod add's a few statues BUT there's 17 STATUE'S, Can't wait to check this mod out too!