订阅以下载
RT Power Switch

Awesome, thanks!

@Milk: Good catch, I'll add a note to do that at some point.

On gravships, the power switch probe direction doesn't rotate when you rotate the ship. That would be a nice tweak to have, though I hope there's an easy hook for it.

ResearchTabDef need two Tags
<generalTitle></generalTitle>
<generalDescription></generalDescription>

There's a mod called power logic that should allow something like that. You can limit how far along the wires it will scan for batteries.

@青丘白狐殿下
Did you ever find a mod which can do that?
I want to do the exact same thing, but haven't found any mods which can.

Unless the batteries are centralized and placed in one place, then split into multiple wires (and connected to switches), and each wire is individually set to open/close when the remaining percentage of battery storage is different, this mod can be used normally
Otherwise, this mod will fail due to connecting the entire power grid. I originally intended to create a separate network for a special battery in the nuclear power plant mod to take special care of it, but unfortunately, this mod cannot achieve this
(Translation machine)

Thanks for the response. I believe I'm now understanding what's going on. I had presumed that the probing direction would split the network and only consider one side. But it's simply probing the full network of that side (including everything on the opposite site), hence the flickering.

I'm trying to build a setup "if the main battery is empty, don't power up the secondary network". This doesn't seems to work if the secondary network also contains batteries, because when the switch is on they are part of the whole network, regardless of the probing direction.

@Tagaris: Seems to me that is exactly what's going on, and it's not "not intended" - it's how RimWorld power networks always worked. I'm not doing anything special there.

I used this a long time ago, but now I don't grasp the system anymore.

I have a power switch between two networks. Both networks contain batteries. I have it set to observe the western network, turn on at 70% and shut off at 50%.

It turns on at 70%, but then flickers between off and on because it connected to empty batteries in the eastern network. It seems like the batteries on the eastern network do count towards the western network if the switch is on, which is probably not intended.

This flickers:
https://imgur.com/a/ol6PeCL