订阅以下载
Dual In-line 8-cylinder Steam Engine

Block count: 180
部件数量：180

Invincible is necessary.
需要无敌。

How to start:
1,Press L to raise the pistons.
2,Pressing N to separate the pistons,wind up the unwound winchs,and start the engine.
3,Have fun!

如何启动这台发动机：
1，按一下L，使活塞抬升，将气缸举起以完成预启动（引擎可能因为绞盘被点燃而燃烧，这是正常现象）；
2，迅速敲击N键，使作为连杆的绞盘收紧，并将预启动活塞分离，引擎即刻启动；
3，敬请观赏水与火交融所产生的连锁反应吧！

ps: If the rope is too tight,pressing M to make it loose.

附：如果绞盘过于收紧导致引擎运转不顺畅，可稍微按动M键少许松开绞盘。

Oops！
Due to the bug in workshop, the machine I uploaded may not functional properly since all the pistons that are supposed to be toggled and all grabbers that are grabbing the floor aren't set this way, sorry about that guys:（
由于创意工坊存在缺陷，导致我上传的机械下载后无法按照设计正常运转。这是由于本该被设置为“切换模式”的零件在上传下载之后丢失了它们的设置。对此我感到非常抱歉。

Please reset all the SPRINGs and PISTONs to TOGGLE MODE, reset GRABBERs on the ground to GRAB STATIC OBJECTS and reset the eight WINCHs on the crankshafts under the machine to START UNWOUND, then try it again.
请重新将所有橡筋和活塞设置为切换模式，将地面上的抓钩设置为抓地，并将机器底部连接转轴的八根绞索设置为“以放松状态启动”，然后重新尝试按原先的步骤启动引擎。