Abonnera för att ladda ner
[RPF]-=Simple Elevator=-(Простой лифт)

1. Put the required number of pistons.
2. Put an improved rotor on top and replace its head with a small one.
3. To build the base of the elevator on the rotor from small blocks.
4. Install a door, two displays, a programmable unit, a panel with three buttons (you can put any panel from the set, the main thing is to enter in three arguments).
5. Put a door and an elevator call button on each floor.
6. In the control panel, select all the blocks related to the elevator and create group "Elevator#1".
7. Upload a script to the programmable block.
8. Enter "LCD_Current_Level" in the first display in "Custom data".
9. In the second "LCD_Next_Level".
10. Enter three arguments into button panel (start , next_1 , next_-1).
11. In the doors on each floor, enter the elevator number in the user data #level= floor number.Example - "1#level=1" .
12. Do the same with the buttons to call the elevator.
13. Click on the button and select the current button from the list of devices and set "Show on HUD On".
14. To clarify, the script sees only those devices that are in the "Elevator#1" group.
15. Doors, buttons, displays can be installed in any number on the floor and in the elevator, i.e. you can have four exits from the elevator. The doors will open depending on if the nearest door is to exit the elevator, i.e. if you have four doors in the elevator and one on the floor, then only one door will open.
16. In addition to English, there is also Chinese, to enable it in the custom data in the language line, enter "cn" without quotes. Honestly, I do not know Chinese at all, if there are gross errors, write, I will correct.