Tilaa ladataksesi
Train - Caboose

The caboose should be used is you have more that 2 carriages connected to a locomotive.

Copied from the locomotive page:
-----------------------------------------------
For more than 2 carriages, it's recommended that you add a caboose (break car) to the end. With it connected, it enables the "Throttle" and "Reverse Throttle" (hotbar 2). These are effectively the break controls for the caboose. Increasing the throttle allows you to smoothly move forward, reducing the throttle to 0 enables the inertial damping on the caboose, bringing the train to a stop. The Reverse Throttle works similarly, but for reverse.


I did originally try using @Whiplash141's subgrid thruster control, but I need to work on the configuration values more before I'm happy releasing it*.


Slot 9 on hotbar 1 toggles "boost", which turns off a few forward thrusters so you don't speed off accidentally when you're without carriages. You'll want to turn this on if you're coupled to carriages.

*Because the thrusters would be facing either side relative to the locomotive when going around a corner, the thrusters would act against the train unless you hold A/D, otherwise, they make driving quite easy.
-----------------------------------------------


The caboose has plenty of timers and programmable blocks in case you'd like to add extra scripts/functionality.


You're free to use the items in the collection as you wish providing you credit myself and @Fencible for the extra beams.