Space Engineers

Space Engineers

评价数不足
Container Transport for Narwhal Container Freighter
   
奖励
收藏
已收藏
取消收藏
Type: World
文件大小
发表于
1.378 MB
2020 年 1 月 25 日 上午 2:49
1 项改动说明 ( 查看 )

订阅以下载
Container Transport for Narwhal Container Freighter

描述
Container Transport (Space) for use with the Narwhal Container Freighter.

This is a world file.

-------------------------
Stats
-------------------------

Weight: depending on configuration


Dimensions (also dependant on config. but in this version):

Length: 100 blocks (50m)
Width: 11 blocks (5.5m)
Height: 13.5 blocks (6.75m)



-------------------------
Controls
-------------------------
Hotbar 9 (For startup and undocking):

1: Turns front connector on/off
2: Switches front connector lock/unlock
3: Turns the ion thrusters for use in space on/off
4: Turns the positioning lights on/off
5: Turns the reactors and gyros on/off
6: Auxillary power

8: Turns bottom connector on/off
9: Switches bottom connector lock/unlock


For an easy docking procedure use the buttons in order from 1 up to 6.
For undocking just reverse the order and use the buttons from 6 down to 1.

The connector at the front is the main connector and should be used to dock the ship.
The connector at the bottom is only in case there are no horizontal connectors available.

The auxiliary small generator is located behind the cockpit and is used to power up the whole ship.
Without power you can not trigger the timer blocks. Do not turn off Aux Power and Main Power at
the same time, unless you are docked to a powered grid.

-----
Hotbar 1 (For general flight):

1: Camera front
2: Gyroscope override on/off
3: Auxiliary Gyroscopes on/off

8: Turns spotlights front on/off
9: Turns Antenna on/off

The gyroscope override should be used to combat the sluggish handling of a fully loaded transporter.
This stops unwanted rotations a little quicker.
When the override is active you should also turn on the auxiliary gyroscopes so you are still able to
turn the ship.

-----
Hotbar 2 (For handling cargo):

1: Turns back connector on/off
2: Switches back connector lock/unlock


-------------------------
Usage
-------------------------
The carriages are connected via connector but don't allow for the transfer of items. You can
lock the carriages by pressing the buttons located at the corresponding connector. The carriages
can be loaded and unloaded using a Container Cat.


-------------------------
Blurb
-------------------------
This is a modular container transporter for use in space. It is made to carry a handful of
standard container units (SCUs) from a central trade hub to the nearby stations in the region.
You can add as many carriages as you like, but more than three is not advised.

The tug at the front has its own cryo pod for longer journeys. It can operate without any
carriages so you can fly it to a trade hub and pick up the loaded carriages with your ordered
goodies.

It's rather simple, so not much more to say here, enjoy!


Container Cat: https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=1978527957

Narwhal: https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=1978526825

Container Truck (Planet): https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=1978527694
1 条留言
CMDR_WATCHYOUR6 2020 年 5 月 10 日 下午 2:57 
Looks cool mate Will try it for sure! u have my like!