订阅以下载
Jetpack Mk3 [VANILA][SCRIPTED]

Vector. Thrust Jetpack Mk3

It is a spec craft with 2 small rotor placed thrusters and a surprising performance.

Features:

1. Only 2 thrusters with 4 base directions and good acceleration for this small craft!
2 . Dampeners (at any direction, side dampening by roll)
3. Cruise mode (maintain forward speed)
4. Hover Mode (maintain the hight saved on mode activation, WARNING: fly slow at low height)
5. Horizon Stabilize (turn it off and use damp mode to flight as normal)
6. Remote control from seat or from distance by antenna to get all hotkeys and normal control
7. Passenger seat control: you can control jetpack with a passenger seat (exept mouse input), but A and D will turn you left and right
8. Can be overaccelerated by gravity to break the 100m/s limit up to 104m/s
9. Has x2 character compared cargo bay
10. Ultra small profile
11. Tools: ore detector, camera, landing gear, remote access by antenna(default is 200m radius, change it if needed)
12. AutoSleep mode: if you are not controled the Jetpack and it's perfectly stable it'll put itself into autosleep mode and awake if it'll be moved or turned or you'll get control of it (autosleep mode runs 10 times slower and does not perform the all code exept UnderControl&velocity&angularVelocity readings means very perfomance friendly)

Critical Tips:
If you want to keep script turned off after server restart - put script in sleep mode.. upd: now it will be saved on the restart

Some tips:
1. You could change the hover height by up-down keybinds (even on passenger seat. Notice: new height will be saved when you hold the key, if you are not holing the key jetpack will try to get the last height saved)
2. When the cruise mode on it will save your forward speed to maintain just press forward until you get wanted speed (if you press backward the speed will set to 0 that will allow dampeneers to stop. If you'll press forward again you'll save your current speed again)
3. Turning on hover mode will auto toggle the damp mode(or keep cruise) and horizon mode but if you will turn of the horizon mode the hover mode will be turned of(and if hover mode was on damp mode will be turned on)
4. The cargo access is from rear
5. The reactors access is from rear and they need to be loaded manually and if they were turned off you'll need to turn them on manually from rear
6. You can use game default controls to unlock landing gear (P key)
7. If you need to lower the jetpack power and it's parked hit "5" hotkey it will turn off thrusters and put script in sleep mode, hit it again if you need to turn them on
8. All script hotkeys are toggleable, check the system statuses on the screen placed right and above passenger seat
9. If you need to toggle all lights there is a hotkey "6" but if you need only spotlight you can hit ingame default "L"
10. If after critical damage and fixing a critical part script does not detect it you can hit hotkey "9" to fast reboot it
11. Horizon mode changes controls a bit(almost like a hover mode user input and surface height): it will save your sealevel height at low vertical speed if you did not hit "up" or "down" keys so if you wanna lift something heavy the easy way will be to use the horizon mode
12. Only 3 small reactors onboard(enough for a full thrust and tools onboard). No need to charge, just throw in uranium and go
13. Use default L keybind to toggle a spotlight


Survial building tip:
You'll need to place thrusters on rotors by yourself and add next on name:
RVector Jetpack 1 *RThrust*
Then reboot the script by a hotkey or recompile to detect new thrusters