商店页面
STAR WARS™ Jedi Knight II: Jedi Outcast™
全部 讨论 截图 实况直播 视频 新闻 指南 评测

STAR WARS™ Jedi Knight II: Jedi Outcast™

商店页面
STAR WARS™ Jedi Knight II: Jedi Outcast™ > 指南 > KeyG 的指南
528 个评价
Jedi Knight II: Ultimate
由 KeyG 制作
Widescreen resolution | Crosshair improvements | Enable full dismemberment | FX_v3.0
High resolution loading screens | Bloody Dismemberment | UltimateWeapons | Imperial Base Officers 1.0
4
10
2
   
奖励
收藏
已收藏
取消收藏
创建者
KeyG
离线
类型: 模组或配置
Languages: 英语
发表于
更新日期
2018 年 2 月 27 日 上午 8:06
2019 年 10 月 27 日 上午 6:21
29,274 不重复访客数
979 当前收藏人数
指南索引
总览
Widescreen resolution 
Crosshair improvements 
Enable full dismemberment 
Mods 
Skins 
Kyle Katarn Skins 
Source 
留言
Widescreen resolution
1. Go to <path-to-game>\GameData\base\.
2. Create and open autoexec.cfg.
3. Add seta r_customwidth X where X is width of your desired resolution (e.g. seta r_customwidth 1680).
4. Add seta r_customheight Y where Y is height of your desired resolution (e.g. seta r_customheight 1050).
5. Add seta cg_fov Z to set the FOV. For 16:9 screens use a value of 97, and for 16:10 screens use a value of 90.
6. Add seta r_mode -1 to make the game use custom resolutions.

You can also paste everything into an autoexec.cfg!
Crosshair improvements
1. Go to <path-to-game>\GameData\base.
2. Create a file called autoexec.cfg.
3. Add all or some of the following lines, modifying them to suit your preferences:

cg_dynamicCrosshair "0" # Disables auto-aim (the crosshair "jumping" onto enemies)
cg_crosshairSize "12" # Makes crosshair half default size. Lower to 2 for just a dot.
cg_crosshairX "3" # Moves crosshair slightly right to line up with where weapon fire actually hits
cg_crosshairY "5" # Moves crosshair slightly down to line up with where weapon fire actually hits
cg_crosshairIdentifyTarget "0" # Disables crosshair turning red on enemies and green on friendlies
cg_crosshairForceHint "0" # Disables hints to use a force power on the targeted enemy

You can also paste everything into an autoexec.cfg!
Enable full dismemberment
1. Navigate to <path-to-game>\GameData\base and create a file called autoexec.cfg in the same folder.
2. Add the following lines.

Singleplayer:

seta sp_language "0"
seta ui_iscensored "0"
seta broadsword "1"
seta g_dismemberment "3"
seta g_dismemberProbabilities "100"
seta g_saberrealisticcombat "1"

g_saberrealisticcombat //sharpness of lightsaber blade
0 (normal), 1 (higher damage), 2 (cuts parts off when damage is fatal), 3 (even touching the blade kills instantly)
g_dismemberment //how much can get sliced off
0 (nothing), 1 (hands, feet), 2 (hands, feet, arms, legs), 3 (hands, feet, arms, legs, head, torso)
g_dismemberprobabilities //how likely dismemberment is to happen
0 to 100 (the number being the chance in percentage)
g_corpseRemovalTime //dead bodies' disappearance
0 (leave bodies), 1 to 120 (the number seconds after which the bodies will disappear)
broadsword //soft bodies (rag-doll physics)
0 (disabled), 1 (enabled), 2 (enabled and skips death animation) [/i]

Multiplayer:


g_dismember "100"
cg_dismember "3"

g_dismember //disable/enable dismemberment
0 (disabled), 100 (enabled)

cg_dismember //how much can get sliced off
0 (nothing), 1 (hands, feet, arms, legs), 2 (hands, feet, arms, legs, head, torso)

You can also paste everything into an autoexec.cfg!

Diese Methode funktioniert nur wenn man das Spiel komplett auf Englisch gestellt hat.


Für Deutsche die das Spiel gerne auf Deutsch Uncut spielen wollen geht es hier weiter.
https://psteamcommunity.yuanyoumao.com/sharedfiles/filedetails/?id=1331523995
Mods
High resolution loading screens

1. Download the HD Loading Screens pack[community.pcgamingwiki.com].
2. Extract the file Jedi_Outcast_HD_loading_screens.pk3 and copy it to <path-to-game>\GameData\base\.

Bloody Dismemberment

1. Download the bloody_dismemberment_jk2 zip[mrwonko.de]
2. Extract the file Bloody_Dismembermentjk2.pk3 and copy it to <path-to-game>\GameData\base\.

FX_v3.0

1. Download the FX_v3.0 rar
2. Extract the file FX.pk3, autoexec.cfg and copy it to <path-to-game>\GameData\base\.
3. Also copy "jk2gamex86.dll" file in <path-to-game>\GameData\base\., this fixes the fov of weapons in 16:9 resolutions. (More information can be found in the Readme!)
4. and open jk2config.cfg with a text editor.
5. Change the following lines to these values. (The file must be set to read-only.)

seta r_subdivisions "1"
seta r_lodcurveerror "10000"
seta r_ignorehwgamma "1"
seta r_gamma "0.98"
seta r_intensity "1.3"
seta cg_shadows "1"
seta r_overBrightBits "1"
seta g_subtitles "1"
seta g_dismemberProbabilities "0"
seta g_dismemberment "3"
seta r_textureMode "GL_LINEAR_MIPMAP_LINEAR"
seta r_depthbits "24"
seta r_colorbits "32"
seta r_texturebits "32"
seta r_detailtextures "1"
seta r_picmip "0"
seta r_ext_texture_filter_anisotropic "1"
seta r_ext_texture_env_add "1"
seta r_ext_compress_lightmaps "0"
seta r_ext_compress_textures "0"
seta s_khz "44"

UltimateWeapons for JK2 1.3

1. Download the ultimateweapons_jk2_fixed zip[jkhub.org]
2. Extract the file UltimateWeapons_JK2.pk3, xyz_bryar_pistol.pk3 and xyz_green_bowcaster.pk3 and copy it to <path-to-game>\GameData\base\.

Reshade - SweetFX

1. Download the ReShade+1.1.0+with+SweetFX+2.0 zip[community.moviebattles.org]
2. Extract all files, and copy it to <path-to-game>\GameData\base\.
3. use ReShade Setup.exe
4. Select "jk2sp.exe" and opengl
5. Configure the settings <path-to-game>\GameData\base\SweetFX\SweetFX_settings.txt.

without Reshade - SweetFX:
with Reshade - SweetFX:

My config:

/*-----------------------------------------------------------.
/ Choose effects /
'-----------------------------------------------------------*/
#define USE_FXAA 1 //[0 or 1]
#define USE_BLOOM 1 //[0 or 1]
#define USE_HDR 1 //[0 or 1]
#define USE_LUMASHARPEN 1 //[0 or 1]
#define USE_LIFTGAMMAGAIN 1 //[0 or 1]
#define USE_CURVES 1 //[0 or 1]
#define USE_DITHER 1 //[0 or 1]

Everything else I have on 0.

/*-----------------------------------------------------------.
/ Bloom settings /
'-----------------------------------------------------------*/
#define BloomThreshold ]30.00 //[0.00 to 50.00] Threshold for what is a bright light (that causes bloom) and what isn't.
#define BloomPower 3.00 //[0.000 to 8.000] Strength of the bloom
#define BloomWidth 0.1 //[0.0000 to 1.0000] Width of the bloom

/*-----------------------------------------------------------.
/ Curves settings /
'-----------------------------------------------------------*/
#define Curves_mode 0 //[0|1|2] Choose what to apply contrast to. 0 = Luma, 1 = Chroma, 2 = both Luma and Chroma. Default is 0 (Luma)
#define Curves_contrast 0.00 //[-1.00 to 1.00] The amount of contrast you want

// -- Advanced curve settings --
#define Curves_formula 2 //[1|2|3|4|5|6|7|8|9|10|11] The contrast s-curve you want to use.
//1 = Sine, 2 = Abs split, 3 = Smoothstep, 4 = Exp formula, 5 = Simplified Catmull-Rom (0,0,1,1), 6 = Perlins Smootherstep
//7 = Abs add, 8 = Techicolor Cinestyle, 9 = Parabola, 10 = Half-circles. 11 = Polynomial split.
//Note that Technicolor Cinestyle is practically identical to Sine, but runs slower. In fact I think the difference might only be due to rounding errors.
//I prefer 2 myself, but 3 is a nice alternative with a little more effect (but harsher on the highlight and shadows) and it's the fastest formula.

I underlined my attitudes and changes once again.
Skins
Imperial Base Officers 1.0

1. Download the B24-Imperial_Base_Officers zip[jkhub.org]
2. Extract the file B24-Imperial_Base_Officers.pk3 and copy it to <path-to-game>\GameData\base\.

Haps Trooper

1. Download the hapstrooper zip[mrwonko.de]
2. Extract the file Haps_Stormtrooper.pk3, Haps_E-11.pk3 and copy it to <path-to-game>\GameData\base\.

Enhanced Skins v3

1. Download the Enhanced_Skins zip[jkhub.org]
2. Extract the file Enhanced_Skins.pk3 and copy it to <path-to-game>\GameData\base\.
Kyle Katarn Skins
Mercenary Kyle (Dark Forces)



1. Download the ib_merc_kyle zip[jkhub.org]
2. Extract the file ib-merc_kyle-SP.pk3, ib-merc_kyle.pk3 and copy it to <path-to-game>\GameData\base\.

Dark Forces II Kyle Katarn (v2.0)



1. Download the df2kyle_version_2 zip[mrwonko.de]
2. Extract the file df2kylev.2.pk3 and copy it to <path-to-game>\GameData\base\.

Kyle Katarn Retexture



1. Download the kyle_katarn_retexture zip[mrwonko.de]
2. Extract the file zzzzzzz_kyle_retexture.pk3 and copy it to <path-to-game>\GameData\base\.
94 条留言
< >
Jaeger 6 月 6 日 上午 10:27 
not sure if im doing right. When i create a mod folder in base directory then in game there are no mods to chose from?
Stay on target, Porkins! 2 月 7 日 上午 3:23 
I'm not sure if I have made a mistake or if there is a conflict with my jk2config and autexec CFG files, but for some reason the character models all look low poly/blocky and have odd looking faces and eyes. Is anyone else getting this?
2Nami 2024 年 9 月 8 日 上午 9:20 
horrible guide
Morghat 2024 年 8 月 31 日 上午 7:33 
jk2gamex86.dll is located in your GameData folder and if the lines doesn't exist in JKF2config just create them (dont forget to add the "seta" in the begging of each line, for exemple when he says change cg_dynamicCrosshair "0" you have to write seta cg_dynamicCrosshair "0" )
Tr0w 2024 年 8 月 16 日 下午 3:17 
You also say in the JKF2config to "change the following lines to these values" and some of those lines aren't even in the config to alter
Tr0w 2024 年 8 月 16 日 下午 2:57 
What do you mean "Also copy "jk2gamex86.dll" file"? There is no file by that name in the fx3.0 mod folder to copy over
TheHuckleberryJones 2024 年 7 月 25 日 下午 4:02 
@flatmotion1 and @NanaVR, I managed to find a fix for my own experience, and give full credit to ACRONYM and Frosty, in the 2nd Top Rated Guide for Outcast (at least as of the moment I write this.

Widescreen tearing off to the edge, into a corner of the screen? Here's the solution. Head to common > Jedi Outcast > GameData, and then right click jk2sp.exe, and go to properties. Open compatibility, then go to change high DPI settings. **Disable the Program DPI check, and Enable the High DPI scaling override, and make sure it's set to application. Again, full credit to two folks from a different thread for that.

Also, to those that are getting an issue with autoexec, I went to Common > Jedi Outcast > Base , and then right clicked jk2config.cfg, and did those modifications in there instead, and it worked like a charm. Well, some things at least, haven't experimented with all.

Hope this helps anyone and everyone :p2cube:
flatmotion1 2024 年 7 月 3 日 下午 6:51 
it doesn't matter what I'm trying on doing, the widescreen fix makes the screen expand way past the physical limitations of my screen and I only see part of the screen
NanaVR 2024 年 3 月 9 日 下午 12:40 
the autoexec.cfg made the game windows even smaller. I can't make it run at 16:9 at 1080p. Any help?
Fitzpatricc 2023 年 12 月 28 日 上午 7:54 
The autoexec.cfg does nothing. I copied the dismemberment commands but not even a hand falls off.
Do you not need the ''HelpUsObi 1'' command, like when putting it all manually in the console?