This month’s update is a little lighter than recent, focused on tackling a number of long-standing bugs and improvements. We’ve been working through community feedback to smooth out some of the more persistent issues and make everyday gameplay feel that bit better. Normally, if bugs persist for several years, there’s usually a good reason for that, whether it’s being difficult to reproduce or requiring a lot of work to resolve.

Looking ahead to November, we’re lining up some strong meta and balance changes. If you’ve got suggestions, don’t hesitate to share them with us across our socials, including Discord[discord.com], we’re always keeping an eye out and reading through what you send.

November will bring the much-anticipated Naval update. This will introduce modular boats with cannons, of course, and much more. You’ll be able to customise your vessel, set sail across the high seas, explore new ocean-based monuments, and even discover smaller outlying islands beyond the horizon.

In December, we'll be celebrating 12 years of Rust, what the heck. 12! 
Additionally, we'll soon be announcing the Warhammer X Rust crossover DLC.

Networking range in Rust is made up of grids. These grids are a fixed size and can be adjusted by server owners, they are sometimes reduced on high-populated community servers to lower network overhead. When these grids are reduced, it also reduces things like: gun audio. This makes the world feel incredibly small and closed off.

We can now run gunshots at different distances to the network range: helping make Rust feel more alive and shaking up the meta by giving advantages/disadvantages to certain weapons.

The old default was around 350 meters.

The new values are as follows:

• Pistols / SAR / SKS / SMGs / Shotguns - 400 meters

• AK / LR - 500 meters

• LMGs / Minigun / Long Distance Rifles (Bolt Action Rifle / L9) - 600 meters

This means that players will now be able to hear you from much further away if you're choosing to use stronger weapons such as the AK or a Bolt Action Rifle. 

It was hard to see what bags belonged to which team members, even if they named them correctly: it could be a pain to figure out.

Provided you now have Building Privilege and a Hammer out, you will now be able to see which bags are owned by which team members when looking at them.

Added visual and audio damage indicator effects to provide clearer feedback on minicopter health status. Players will now see progressive visual cues as the minicopter takes damage, with thresholds at 45% and 20% health remaining. Now if you see a mini leaving a raid trailing smoke and you can't hit the driver, you'll know to aim for the chassis itself!

Foliage displacement has been improved to allow for smooth transitions[files.facepunch.com]. This includes when objects are removed and also makes displacement from moving sources like players look more realistic and natural.

With the last patch, we introduced new volumetric clouds as an alternative to the 2D clouds.  However, we put them under experimental settings and kept them disabled by default.

With this patch, the volumetric clouds are now enabled by default, with the long-term goal being to completely replace the 2D clouds.  The setting for them has been moved under the normal graphics settings tab, and the quality levels are tied to graphics presets.  Additionally, the graphics.vclouds convar has been replaced by graphics.volumetric_clouds.

Workshop submissions using the in-client skin creator tool now automatically take screenshots that are included in the upload.

For several years, a bug has caused players eyes to sometimes appear closed, this is now fixed!

Fixed players being invisible when respawning, whilst asleep

Fixed C4 not being stackable after enabling RF

Fixed rugs deleting deployables when picked up, if on a tugboat

Fixed barricade deployment being blocked on sand dunes around giant excavator

Taking the stage this month is the Exhibit Decor Pack, an illuminating collection of deployable items to glow up your base. 

The pack can be purchased in-game or from the Rust Steam item store[rust.facepunch.com]

Bulb String Lights

Get that warm and fuzzy feeling with these decorative bulb string lights. Hosting a garden party or wiping a raiding party - it’ll look fabulous.

Clothing Mannequin

Goes by “Manny”. Dress him up in your favourite attire and pose him for style. He’ll even swap clothes with you if you want a quick wardrobe change. 

Wall Cabinet 

Place on the wall and store your smaller items inside or on the shelf below. Has 18 slots.

Moveable Spotlights

Light-up the action with these moveable spotlights. Target them with the hammer and they’ll orient towards you! Comes both in wall and floor mountable varieties. 

Fairy Lights

Smaller and more twinkly than the Bulb String Lights, these Fairy Lights bring a touch of magic to the wasteland.

Fluorescent Strip Lights

Giving off a strong UV light, these strip lights will be a great addition to any grow-op. Comes both in wall and ceiling mountable varieties. 

Chandelier

Give a touch of elegance to your base with this adjustable Chandelier light. Raise and lower it to the perfect height. Time to fit a grand staircase in your 2x1. 

Electric Table Lamp

Settle down for the long dark night with this cozy Electric Table Lamp. Maybe get a buddy to read you a story.

Beanbag Chairs

Sit back and relax in these Beanbag Chairs. Comes in two varieties. 

Wallpapers

Interior design to the max with these unique and sparkly wallpapers. Included are a dark shaggy carpet, hexagonal wall tiles and painted gold stars ceiling decoration! 

Back in Jungle Update[rust.facepunch.com] blog, I wrote about experimenting with batched processing of players on our servers. To summarize, I talked about how we needed to restructure code and start doing more operations in batches instead of on individual basis, and I showcased how it allowed us to leverage Burst and parallel job execution to speed up NoClip checks on the server.

This update I'm taking it a step further - I've converted more parts of our player update code to batch/pipeline form, which allowed to clearly see dependencies between processing stages. This, in turn, confirmed which parts we can try to process in parallel on worker threads. As a result, we can now offload a bunch of player-related logic over to worker threads, speeding up the main thread:

Right now it's gated behind UsePlayerUpdateJobs 2 server variable, as an experimental mode. We've been running this on our EU Staging Server for a couple weeks to confirm that things are stable - and so far it's holding, but I don't have clear guarantees on how it will scale on high-population servers. In theory, thanks to these points:

• Faster server occlusion (more on that below)

• Avoiding redundant calculations of player state by using frame caches

• Use of managed threads for work offloading (sending entity snapshots and destroy messages have been converted)

I'm hoping that it'll allow the server to scale better with a higher player count and make player processing less of a bottleneck.

The plan is to roll it out gradually to release servers, while confirming server stability & performance - so far it's been developed in a lightly stress tested EU Staging, so I'm missing real world data. After roll-out is successful, I'll be able to identify further bottlenecks and work on expanding parallel processing.

As part of the above rewrite I took a look at server occlusion, as I noticed that it has been running too many checks per frame. In addition to other problems, this caused server occlusion to eat up to 8ms in some cases, like bellow:

Having to process 10k occlusion queries for 350 players seems to be excessive, even if it eventually boils down to only 500 paths to check.

I've reworked the relevant code to benefit from the following improvements when UsePlayerUpdateJobs 2 is enabled:

• We now deduplicate occlusion queries - if player A and player B want to check for visibility of each other, it's enough to just check A->B

• We run occlusion queries in parallel

• We cache results of occlusion queries for the duration of a frame, allowing us to skip them throughout the rest of the frame

I'm hoping that the gains will scale with the player count and become substantial once we're testing with 350+ players.

The rewrite of player update allows us to see more clearly how the execution and data flow, but it's lacking further optimizations(aware of 1 bottleneck) and tuning (controlling worker batch sizes). My plan is to use the new telemetry to guide where to focus efforts as I continue to expand UsePlayerUpdateJobs further. I currently don't see a specific end in sight, as the more is converted, the more opportunities to capitalize on data/execution patterns we get.

If things go well for UsePlayerUpdateJobs 2 during this patch, it's likely the mode will be promoted to level 1, and a new experimental stage will begin.

As mentioned in last patches devblog[rust.facepunch.com], we are going ahead with requiring a minimum encryption level of 2 on servers that wish to be considered 'secure' and appear on the Rust Client server browser.

As a reminder, encryption level 2 is the default configuration for Rust Dedicated Servers and as a result the vast majority of server owners do not need to take action. For those that do, you will need to update your server.encryption convar to 2 and restart your server.

Additionally, we are going ahead with the removal of the server.secure convar. As previously mentioned, any insecure servers will now need to pass the '-insecure' parameter on server startup instead.

Rust Kingdoms 3 returns bigger and better! Watch for socials to see the lineup and what drops you can collect!

Head to https://twitch.facepunch.com/connect to sync your Twitch and Steam accounts.

Hardcore mode is making a comeback this month, bringing with it some community requested changes and a few new tweaks we've been planning for a while.

Our goal with game modes, such as Primitive and Hardcore, is to offer a fresh way to experience Rust, see how players respond, and try out different ideas. We don’t expect them to stay popular for long, usually just a couple of months. They’re not a major development focus or time sink, as most of the team is working on bigger features behind the scenes.

We look forward to seeing your feedback. These game modes help guide our decision-making for the core Rust experience, so your input really does matter.
If Hardcore’s not your thing, don’t worry, there are plenty of other changes to check out in the blog below.

The fog of war system is back on Hardcore game mode, exclusively, obscuring the map when you first spawn and slowly revealing itself as you move around the world. This is now integrated with the normal map system rather than a held item like it's original version.

Our goal with this mode is to heighten the inherent risk and reward gameplay in Rust, hopefully leading players to consider their next moves carefully as the consequences for dying can be significant.

As part of an effort to make navigation more interesting in Hardcore we have added the compass as a new handheld tool item.
In Hardcore mode your location on the map is now no longer displayed at all unless you have compass equipped in your belt. Once you have a compass in the belt, the player location is displayed without the direction indicator. The compass UI at the top of the screen is also completely removed, as it was in the previous Hardcore mode.

Whilst the compass is available to use in all other gamemodes too, the changes relating to the map and compass UI are limited to the Hardcore gamemode only.

There is endless fun to be had in spinning around in circles whilst holding the compass. I hope that it will also prove valuable to all those who enjoy roleplaying as scurvy seadogs navigating the high seas aboard boats.

Firearms can no longer be crafted or researched at all. You'll now be at the mercy of what loot you find in the world, although you can now repair any weapon you find without needing to research it. We've also increased the crafting costs of all ammunition by 5x. 

We hope these changes will make you think twice before engaging and promote a more thoughtful style of play.

On hardcore, Sleeping bag respawn cooldowns have been increased to 15 minutes, while beds will now be 10 minutes. Along with the weapon crafting changes this hopefully leads to a more complex thought process when deciding whether to attack other players.

We've doubled the upkeep cost in Hardcore mode. The goal here is to encourage tighter, more efficient base designs and reduce the number of massive, sprawling compounds that tend to dominate the map over time. With higher upkeep, players will need to think more strategically about how they build and maintain their bases, prioritising what's essential and trimming the excess.

This change should help promote more frequent raiding, faster turnover of bases, and a more dynamic map overall. It also aligns with the core intent of Hardcore, leaner gameplay, higher stakes, and a tougher, more unforgiving survival loop. We'll be keeping an eye on how this plays out and adjusting if needed.

This month we've introduced a refreshed look for our menu. After several years of our existing menu being built upon we've decided to create a new experience built from the ground up. Allowing us to add new features in, better UX and a more modern appearance. 

On load to Rust post-patch you'll notice our shiny new interface. Across the top we have the new navigation menu with all of the usual links just in a horizontal format. And along the bottom we have the social bar, the place you go to access your friends list, party system and send our message.

Sandwiched between those two is where we'll hold all of the pages, content, media and everything else.

Home

Our new homepage design. Primarily more of the same from the last UI but an improved focus on the most recent patch. In the top left of the interface we now have a new call to action, the Twitch Drops tile. It'll be activated when we've published a new event either coming soon or currently in progress. Bottom left we have a curated list of heroes - whether that be weekly skins, featured DLCs or even a bit of information we want to share.

In the top right we've added a new area for Quick Join, see your previously played servers quickly. If you want to jump straight back into the action you can connect from the homepage. No extra clicks required. 

Play

A refreshed look at the Play tab. We've introduced a horizontal tab menu for the server types, from Official all the way across to what your friends are playing. Down the left side of the UI we've got a filter menu, we've spent a bit of time tidying this area up so its a lot less overwhelming and gives you a quick glance at what filters and options you have toggled to tailor your server results. 

We've added a few new features: like sorting via  server modes, as well as the ability to see queue sizes before you join.

Server Maps

You can now preview a server map before you join. This lets you plan where you're going to put your base, make sure its got whatever biome you love and make plans before committing to a queue. This works for any servers with Rust+ support.

Store

Featured, Limited and General stores all got a major overhaul. We fully rewrote the entire store system to improve the experience of viewing skins and packs. Within the Featured tab we'll have a curated list of items for sale as well as a block for the weekly skins.

Skin Viewer

On a few pages you'll notice we've added a new skin viewer. A new overlay where you can view skins from all angles. Rotate, pan and zoom to inspect skins to your hearts content. We've also put the same viewer into the Inventory page so you can see existing skins in all their glory.

Inventory

The inventory has been tidied up, a new organised structure. Pressing on an item within your inventory will now open a new modal which will give you information about it, a 3D model viewer if available, market rates and even if you can break it down or not.

Likewise the crafting of items has also received the same modals to make everything consistent, cleaner and more usable.

Settings

Settings also received a full overhaul. Options have been re-organized into categories and a search bar will let you filter all of the controls, highlighting the pages in which items match your query.

Gesture Wheel

The gesture menu got a full overhaul from the existing experience. You can now drag and drop items from the gesture bar on the right to the slots you want them to sit in. Whether you replace existing items, or into empty sockets you should be able to freely move items around quicker than ever before. 

We've also introduced other gesture packs into the menu, allowing you to see what you own and what you don't own with the ability to quickly navigate to the pack on the store to learn more about it.

You should now expect up to 65% quicker loading from desktop to loading into a server due to a big refactor of how we load assets. This optimization also enabled us to reduce our memory usage by 10-20%. Results will vary but everyone should see a boost!

The experimental option "Optimized Loading" has also been removed. This new optimization completely replaces that and cannot be toggled.

These optimizations also apply to the Rust server.

Everyone who has played Rust before now would know that Asset Warmup takes so long. Even on a top end PC it can take at least a minute or two to complete on its own. This loading step is where we load all of our prefabs from disk and preprocess them to automatically fill in bits of information and remove unnecessary pieces for the client (or server). Loading the prefabs takes up most of the time here. If you had the experimental Optimized Loading option enabled it made them load quicker by having Unity load the prefabs asynchronously (and starts as soon as the menu is visible).

Our new method of loading prefabs is to stick all of them into a couple scenes and then load the scenes. Apparently Unity is way faster at loading scenes than prefabs (who knew?). We can also load those scenes asynchronously - they're loading as soon as you're booted to the menu. Once they're loaded we hook them into our ResourceRef system (basically addressables but predates addressables) and then they can be used as normal prefabs everywhere.

The memory usage reductions come from not needing two copies of every prefab (the prefab asset + preprocessed copy) and doing a chunk of the preprocessing at build time. Both weren't possible before this optimization because modifying prefab assets during builds is unreliable and modifying prefab assets at runtime is unusually slow. Using scenes lets us stop using prefab assets as soon as they get instantiated into one of these scenes.

Minigun turret changesMiniguns placed in Autoturrets and Attack Helicopters now spin up before shooting

Invisible indicatorAdmins using the `debug.invis` command now have a visual indicator when invis is enabled

God indicatorAdmins using the `global.god` (godmode) command now have a visual indicator when godmode is enabled

Map marker keybindsTwo new keybinds can be set in the options, one to place a marker on your current position, and one to clear all map markers

Dynamic weapon stats

Weapon stats update when adding/removing attachments

Server restart warningsServer restart chat messages moved to toasts

Tugboat hornTugboat can now honk in the same way cars can

Metal detectors can now detect weapons dropped by other players. Whenever a player's backpack or dropped weapon despawns, it will now be buried for a day, allowing other players to find it using a metal detector.

To keep things balanced, the chances of finding a weapon are relatively low, but they increase based on the number of weapons dropped. This means scavenging after a raid with a metal detector should still feel rewarding for players.

The buried weapons are stored in a rough grid and have a chance of being buried, you won't be able to drop a weapon to hide it and return to the same spot and dig it back up. The buried weapons will also expire after 24 hours if they haven't been found. 

The weapons are also filtered so that you won't find something crazy underground but the majority of weapons should still be allowed. 

This month, we’re landing a new Hazmat pack based around an elite fighter pilot. 

The pack can be purchased in-game or from the Rust Steam item store.[rust.facepunch.com]

Pilot Suit

Touchdown in the turbulent world of Rust in this fighter pilot’s G-Suit. Whether sustaining high speed turns or dealing with rads, this suit has you covered.

M15 Semi-Automatic Pistol

Only high-ranking personnel get to handle the M15. Put it to good use.

Flight Control Codelock

High-tech and guaranteed to keep the hostiles out.

Black Box wood storage box

There’s no chance of rescue, so salvage what you can and store it here.

Salvaged Ejector Seat Chair

Pulled from the wreckage and repurposed as the coolest place to hang out after a hard day’s raiding. No longer ejects. 

Suit up here[rust.facepunch.com] 

Starting this patch, we've made some minor changes to how servers mark themselves as insecure as well as introduced an additional requirement a secure server needs to meet in order to appear on the Rust Client server browser.

If you wish to run an insecure server you will now pass the '-insecure' parameter on startup rather than setting the server.secure convar to false. The convar still exists and server owners will see warnings on server startup if they are still using it, we are aiming to remove the convar entirely on the 4th September 2025.

For existing secure servers, you now need to ensure your secure.encryption value is at least 1 to appear on the server browser in the Rust Client. We have plans to further increase this requirement to 2 on the 4th September 2025. This is, and has been, the default configuration for Rust Dedicated Servers and as a result these changes only impact a minority of servers and most will not need to take any action.

With this patch, Rust's atmospherics have received a facelift, including:

• New volumetric clouds.

• New volumetric, biome-localized fog.

The goal is to better support a wide variety of dynamic weather, which is something we struggled to do with the old tech.

Available under the Experimental options tab as a replacement for the 2D clouds, the volumetric clouds are fully 3D, move across the sky, morph into different shapes with weather, and interact naturally with lighting from the sky at all times of day.

\[pics, video of clouds moving]

This new fogging technique allows us to have different fog setups localized to each biome that remain spatially consistent.

Previously, we would adjust fog globally depending on which biome you were standing in, which was unnatural and provided an advantage to players standing outside of the biome.  Now, for example, you'll be able to see the haziness of the arctic biome as an outsider looking in.

Along with this, the volumetric nature of the fog presents cool visual improvements.  For example, it receives light from the sun and shadows from the surrounding environment, creating natural god rays and pretty sunsets.  The fog in each biome of also colored slightly differently to better match the environment.

For those marathon painters creating the next masterpiece of Rust's art history, we want to make sure you don't lose it all if you happen to starve to death before the final brush stroke. With this toggleable option checked your paintings will automatically sync with the server every 30 seconds, saving you from a complete restart.

Foliage (trees, bushes) outside of shadow range will apply directional self-shadowing. This should improve visuals of distant foliage and reduce trees looking like they are glowing (especially at sunrise/set).

Each time a bullet or thrown weapon moves around, the client would perform some physics raycasts to see what it had hit and process the results (damage, blood, sound, etc.), then the next projectile would do the same, then the next one, etc. This is pretty standard and works fine when you have a small number of projectiles, but can be a bit slow when you have a large number of projectiles in a densely packed area.

The projectiles have been rewritten to update as a single batched set, where the information on the physics queries they need to perform is gathered first and ran across all available job threads in parallel. Updating projectiles as a set like this also opened up a few new optimisation paths that we're now making use of. 

From our benchmarks we've seen that batched projectiles are generally at least twice as fast to compute as the old serial projectiles. You're not going to see your framerate double but things should be a little smoother when fights get intense.

Quite a small change, but we've modified the syringe self injection animation to now apply the heal just as the syringe leaves the arm rather than slightly after. The animation was reworked so that the duration is no different to before, this is purely a visual change.

This should hopefully result in less accidentally cancelled heals.

Unless you're a skins artist you probably won't have noticed, but we identified a bug in the client that caused normal maps to be updated in an incorrect configuration under certain circumstances when submitted via the Workshop. 

The Workshop submission was fixed in a previous update but now the historically affected skins have also been fixed and should appear exactly how the creator intended!

August 7th - 17th!

And from more of our favourite creators on the rise that you should definitely start to pay attention to!
Be sure to sync up[twitch.facepunch.com] and claim your Drops after watching these fantastic creators on Twitch.

Are you spending your holidays weary of raids? Do you need a friend to help defend your base? Well, Rust is 50% off on Steam for the weekend!
Gift it to a friend, or let them know they can get it here.